Nokia X3-02 with VOIP other than Gizmo5
Many many thanks to sudude and traud. I can confirm that my Nokia X3-02 VOIP work perfectly configured with .xml file from [URL="http://discussion.forum.nokia.com/forum/showthread.php?136775-Nokia-6300i-with-Voip-other-than-Gizmo5&p=437307&viewfull=1#post437307"]this post[/URL], just replacing the name of the voip provider (Justvoip), username and password.
I tried n0kvoip but when activate the service it is rejected by justvoip....didn't work for me. I've contact and send them my *.xml file and they promised that in the next version will make some changes so I think it will work, still not tried.
Here are some Justvoip settings:
SIP port : 5060
Registrar : sip.justvoip.com
Proxy server : sip.justvoip.com
Outbound proxy server : leave empty
Account name : your JustVoip username
Password : your JustVoip password
Display name/number : your JustVoip username or voipnumber
Stunserver (option) : stun.justvoip.com
If you have audio problems:
Use a STUN server (e.g. stun.justvoip.com) with port 3478 (if supported by your device)
Use the G.711 codec
Here is example .xml file for the phone [URL="http://www.forum.nokia.com/info/sw.nokia.com/id/bfb5c5ba-5237-4d02-906f-1a9a9b61df87/Series_40_VoIP_v92_Settings_Example.html"]CLICK[/URL]
Thank you again :)
Here is the working .xml content:
[QUOTE]<?xml version="1.0"?>
<!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN"
"http://www.wapforum.org/DTD/prov.dtd">
<wap-provisioningdoc version="1.1">
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<characteristic type="BOOTSTRAP">
<parm name="NAME" value="justvoip" />
</characteristic>
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- Nokia S40 v72 VoIP settings, w9013 -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w9013"/>
<parm name="PROVIDER-ID" value="justvoip"/>
<parm name="NAME" value="justvoip"/>
<parm name="TO-NAPID" value="INTERNET"/>
<parm name="TO-APPREF" value="justvoip_SIP_settings"/>
<parm name="SMPORT" value="16384"/>
<parm name="EMPORT" value="32766"/>
<parm name="MEDIAQOS" value="46"/>
<parm name="SECURECALLPREF" value="0"/>
<parm name="RTCP" value="0"/>
<parm name="MOMAXALERT" value="45"/>
<parm name="MTMAXALERT" value="30"/>
<!-- AMR NB -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="0"/>
<parm name="PRIORITYINDEX" value="0"/>
<parm name="OCTET-ALIGN"/>
<parm name="VAD"/>
</characteristic>
<!-- G.729 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="10"/>
<parm name="PRIORITYINDEX" value="1"/>
<parm name="ANNEXB"/>
</characteristic>
<!-- G711 a-law with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="3"/>
<parm name="PRIORITYINDEX" value="2"/>
<parm name="VAD"/>
</characteristic>
<!-- G711 u-law with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="4"/>
<parm name="PRIORITYINDEX" value="3"/>
<parm name="VAD"/>
</characteristic>
<!-- G.726-40 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="5"/>
<parm name="PRIORITYINDEX" value="4"/>
<parm name="VAD"/>
</characteristic>
<!-- G.726-32 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="6"/>
<parm name="PRIORITYINDEX" value="5"/>
<parm name="VAD"/>
</characteristic>
<!-- G.726-24 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="7"/>
<parm name="PRIORITYINDEX" value="6"/>
<parm name="VAD"/>
</characteristic>
<!-- G.726-16 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="8"/>
<parm name="PRIORITYINDEX" value="7"/>
<parm name="VAD"/>
</characteristic>
<!-- CN Comfort noise with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="9"/>
<parm name="PRIORITYINDEX" value="8"/>
</characteristic>
</characteristic>
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- NAT/FW settings, w902E -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w902E"/>
<parm name="NAME" value="NAT/FW Traversal settings"/>
<characteristic type="NW">
<parm name="APPREF" value="justvoip_NAT_FW_settings"/>
<parm name="DOMAIN" value="sip.justvoip.com"/>
<parm name="STUNSRVADDR" value="0.0.0.0"/>
<parm name="STUNSRVPORT" value="3478"/>
<parm name="NATREFRESHTCP" value="30"/>
<parm name="NATREFRESHUDP" value="20"/>
</characteristic>
<characteristic type="NATIAP">
<parm name="TO-NAPID" value="INTERNET"/>
<parm name="REFRESHTCP" value="1200"/>
<parm name="REFRESHUDP" value="28"/>
<parm name="STUNRETRANSMIT" value="250"/>
</characteristic>
</characteristic>
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- SIP settings, w9010 -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w9010"/>
<parm name="APPREF" value="justvoip_SIP_settings"/>
<parm name="PROVIDER-ID" value="justvoip"/>
<parm name="TO-NAPID" value="INTERNET"/>
<parm name="PTYPE" value="IETF"/>
<parm name="PUID" value="sip:USERNAME@justvoip.com"/>
<parm name="APROTOCOL" value="UDP" />
<!-- Outbound settings -->
<characteristic type="APPADDR">
<parm name="LR"/>
<parm name="ADDR" value="sip.justvoip.com"/>
<characteristic type="PORT">
<parm name="PORTNBR" value="5060" />
</characteristic>
</characteristic>
<!-- Outbound credentials -->
<characteristic type="APPAUTH">
<parm name="AAUTHNAME" value="USERNAME"/>
<parm name="AAUTHSECRET" value="PASSWORD"/>
<parm name="AAUTHDATA" value=""/>
<parm name="AAUTHTYPE" value="HTTP-DIGEST" />
</characteristic>
<!-- Registrar location and credentials -->
<characteristic type="RESOURCE">
<parm name="URI" value="sip.justvoip.com"/>
<parm name="AAUTHNAME" value="USERNAME"/>
<parm name="AAUTHSECRET" value="PASSWORD"/>
<parm name="AAUTHDATA" value=""/>
<parm name="AAUTHTYPE" value="HTTP-DIGEST" />
</characteristic>
</characteristic>
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
</wap-provisioningdoc>[/QUOTE]
Re: Nokia X3-02 with VOIP other than Gizmo5
what is your access point : WLAN or 3G.
I cannot make it to work with 3G.
Any advice is appreciated.
Thanks you
Re: Nokia X3-02 with VOIP other than Gizmo5
@stambo98: your XMl template is for 6300i, there are some new stuff in X3-02. See, [url]http://www.forum.nokia.com/info/sw.nokia.com/id/bfb5c5ba-5237-4d02-906f-1a9a9b61df87/Series_40_VoIP_v92_Settings_Example.html[/url]
@khurshidiqbalindia: The X3-02 VoIP documentation ([url]http://wiki.forum.nokia.com/index.php/Nokia_Series_40_VoIP_Client_documentation[/url]) or user guide do not mention anything about VoIP working over 3G, they just mention WiFi. So apparently it does not support VoIP over 3G
Re: Nokia X3-02 with VOIP other than Gizmo5
I'm just confirming that [URL="http://n0kvoip.megabyet.net/"]n0kVoIP[/URL] settings work for me on the Nokia X3-02 Touch and Type phone.
I can only connect to VoIP server through wifi connection. I thought it might be some settings that [URL="http://n0kvoip.megabyet.net/"]nokvoip[/URL] has so I went through the xml file and adjusted settings. Again, all I get is connection is only possible through wifi.
If anyone has successfully connected to their VoIP Service Provider through a 3G connection. Please share what you've done. Thanks.
Re: Nokia X3-02 with VOIP other than Gizmo5
Hi Sudude,
Thanks for info,
I built my voip setting with WLAN and now i am getting this message " WLAN not available for this account".
but I can connect to my WLAN and browse internet / check for updates. etc
any help will be appreciated. Please help to modify the settings in xml file.
thanks
Re: Nokia X3-02 with VOIP other than Gizmo5
Could you share the XML with which you get the error note
Re: Nokia X3-02 with VOIP other than Gizmo5
[QUOTE=sudude;800970]@stambo98: your XMl template is for 6300i, there are some new stuff in X3-02. See, [url]http://www.forum.nokia.com/info/sw.nokia.com/id/bfb5c5ba-5237-4d02-906f-1a9a9b61df87/Series_40_VoIP_v92_Settings_Example.html[/url]
[/QUOTE]
Yes it is for 6300i but works very fine on my wifes X3-02, the example files are incomprehensible for me dont have time to compare and adjust them if somebody does please lets share it. Happy New Year to all :-))
Re: Nokia X3-02 with VOIP other than Gizmo5
I installed some VoIp accounts on my C3-01 with n0kvoip, they are all not working. Now I have a lot of entries...how can I delete them? It's easy to install the .prov files via Bluetooth but how can they be removed?!
Thank you for your help!
sun
Re: Nokia X3-02 with VOIP other than Gizmo5
Menu » Settings » Configuration » Def. config. sett. » long tap on the one » Delete » :)
Re: Nokia X3-02 with VOIP other than Gizmo5
Thank you traud, it works!
Re: Nokia X3-02 with VOIP other than Gizmo5
stambo98, see [url]http://www.forum.nokia.com/info/sw.nokia.com/id/14894e12-030c-4e70-bcd4-bce21fd9c81d/Release_Note_for_Nokia_Series_40_VoIP_Releases.html[/url] for the differencies. Perhaps the biggest one is the HD Voice support
sun37, haven't had any problems with that tool. have you reported the problems for them ? atleast got an response when wanting to have one provider more supported.
Re: Nokia X3-02 with VOIP other than Gizmo5
hi stambo98,
i have changed the voip provider, username and password in the .xml, i compiled .xml to .prov and push it to the nokia x3-02 and saved the config, it gets logged in the voip server, i can dial and hear the ringing but once the call gets connected, i cannot hear the other person and the other person cannot hear me.
so please help me out.
Re: Nokia X3-02 with VOIP other than Gizmo5
[QUOTE=yorkhoh;801725]I'm just confirming that [URL="http://n0kvoip.megabyet.net/"]n0kVoIP[/URL] settings work for me on the Nokia X3-02 Touch and Type phone.
I can only connect to VoIP server through wifi connection. I thought it might be some settings that [URL="http://n0kvoip.megabyet.net/"]nokvoip[/URL] has so I went through the xml file and adjusted settings. Again, all I get is connection is only possible through wifi.
If anyone has successfully connected to their VoIP Service Provider through a 3G connection. Please share what you've done. Thanks.[/QUOTE]
Can someone try to add in the:
<!-- Nokia S40 v72 VoIP settings, w9013 -->
Section the following parameter:
<parm name="WCDMA" value="1"/>
test and report back
Thanks,
Re: Nokia X3-02 with VOIP other than Gizmo5
Have tried different params, like the one used in S60 without any luck. I have come to the conclusion that X3-02 does not support VoIP over 3G. This would be also in line with the VoIP documentation ([url]http://wiki.forum.nokia.com/index.php/Nokia_Series_40_VoIP_Client_documentation[/url]) which only talks about WiFi as the connectivity technology.
Btw X3-02 is using the v92 VoIP version, there are some improvements like HD voice which sounds pretty nice :)
Re: Nokia X3-02 with VOIP other than Gizmo5
prakkrish, although not targeted for Series 40, still I recommend to go through [url=https://www.forum.nokia.com/info/sw.nokia.com/id/2e470bc4-236d-48e2-bc96-977784811af8/Nokia_S60_VoIP_Implementation_Troubleshooting_Guide.html]this document[/url]. You might have an issue with NAT traversal.
