Nokia M1112, Switch 10/100Mbps 24 ports, 3 Hubs and lots of pc's. I have a subnet 172.26.0.1/255.255.255.0 which gateway is 172.26.0.1, this is the IP eth route thus this subnet can get internet. On the other hand the subnet 172.26.1.0/255.255.25.0 can't get internet.
Does anaybody know how i can set others IP's eth in the router, so I would use these ones as gateways in the other subnets?
Thanks a million.
Bye, good luck.