AT commands

[kgirish86]

i wanted sm info abt sending SMS through PC
i tried sm AT commands but its showing errors
i m using Nokia6630 + USB data cable .. Can sm1 plz send me simplest code to be typed at hyperterminal for sending sms?
thnx.......

[maxsax]

About all informations on AT commands on Nokia cells are reported in following documents:

• Nokia AT Command Guide v2.1
• AT Command Set For Nokia CDMA Products v1.1
• AT Command Set For Nokia GSM And WCDMA Products v1.2
• Nokia premicell data list of AT commands
• Nokia GSM set AT commands Set

I connect to a Nokia N80 (S60 3rd edition) with Hyperterminal using USB cable (connecting to Nokia USB virtual COM port), or using Modem application on cell using IR connection (connecting to virtual IR port), or using bluetooth DUN profile (using bluetooth virtual COM port), but no AT command for send/receive/list SMS seems to be implemented (response is always ERROR).

How can I use some SW developed by me in the past that use successfully AT command on Siemens cells?

Thanks in advance

Max

[nly]

I would use Nokia PC Suite that allows to this and investigate if the PC suite Connectivity API for Windows allows you to do this.

http://www.forum.nokia.com/main/reso...mentation.html

http://www.forum.nokia.com/info/sw.n...y_API_1_1.html

[maxsax]

With PC Suite (or related API) I can access SMS stored in a vmg format (a simil-vcf format).
But this no give me access to SMS using AT commands.
Another post specifies that S60 3rd edition cannot read msgs using AT command: why?

Thanks

Max

[BZapf]

I've opened a page in the Wiki to enhance investigation of this issue.

N73 clearly doesn't behave as Nokia documentation say it should, and from what i see in other Forums or even here, the problem is well-known across many devices.

Nokia so far did not comment. People pay in excess of 200€ for these phones, and Nokia doesn't supply acceptable documentation.

http://wiki.forum.nokia.com/index.php/Firmware_Bugs
http://wiki.forum.nokia.com/index.php/Talk:AT_Commands