OMA voip provison, proxy problem

[octans]

Hi everyone,

I am doing OMA provision to a N95 mobile,
when my n95 is provisioned by my sms, always the proxy server address is auto added as "sip:", actually I did not config anything about proxy(outbound) server stuff, and because that "sip:" auto added problem, the mobile can not register to my sip server, except I manually delete that "sip:".

So problem is that the mobile will auto add "sip:" to proxy server address when I totally did not config anything about proxy(outbound) stuff, does anyone experience and solve this problem?

I know this question has been prompted on 2008-02-19 by the post of
http://discussion.forum.nokia.com/fo...d.php?t=127254

but there is no answer of this question, hope I can get valid answer this time. Below is part of my xml file for provision the sip profile,
<characteristic type="APPLICATION">
<parm name="APPID" value="w9010"></parm>
<parm name="PROVIDER-ID" value="ProviderIDSIP"></parm>
<parm name="PTYPE" value="IETF"></parm>
<parm name="APPREF" value="sip"></parm>
<parm name="NAME" value="SIP"></parm>
<parm name="PUID" value="12345@192.168.80.137"></parm>
<parm name="TO-NAPID" value="napid"></parm>
<parm name="APROTOCOL" value="UDP"></parm>
<characteristic type="RESOURCE">
<parm name="URI" value="192.168.80.137:5060;transport=UDP"></parm>
<parm name="AAUTHNAME" value="12345"></parm>
<parm name="AAUTHSECRET" value="LBbCzJzg"></parm>
<parm name="AAUTHDATA" value="abcd"></parm>
</characteristic>
</characteristic>


Thanks,
Gavin

[octans]

Still no reply.

I did not find out why,
So finally I decided to also config the proxy/outbound stuff, need pay attention to if need loose routing.

[traud]

<parm name="APROTOCOL" value="UDP" />

If I do not specify that, I do not get any proxy configuration and no sip:. Anyway, are you really, really sure you do not want to specify proxy?