Card Phone 2.0 with Lotus Notes 5.08 on Windows 2000

[Tiggerkater]

I have a problem, the Card Phone works under Windows 2000 but i cant make calls from Notes. I get every time the Error "Unit ore Devicenumber is in use by an other device". Can anybody help me?

[thewire]

I am having the same problem. The Lotus Notes Generic All Speed Modem file worked OK on 9* but no longer works since I upgraded to W2K. any suggested solutions would be welcome.

[Leskinen]

If anyone is still struggling with this problem, try the following:

1) Test that the card phone works in Windows

2) Add following line to notes.ini:

XPC_Disable_IOCP=1

and restart Notes (and Windows too to be sure)

3) Upgrading to 5.0.11 is suggested, since it has many bugfixes to Notes XPC

Finally, here is a mdm-file I have used for the card phone. Set the port speed to 115200 when configuring the port. Enjoy!


; .Nokia Cardphone 2.0
; {NCP2.MDM}
;
; Created: 20/10/94 - Mark A. Lamb - Lotus cc:Mail Support (UK)
; Neal Quinlan - Notes Support (UK)
; Modified: 2/12/94 - Petri Heinonen - Nokia Mobile Phones (FIN)
; 29/11/96 - Numeric responses added (ATV0)
; 03/01/00 - Modified to Nokia Cardphone 2.0
; 03/01/00 - Jarno Rekonius - Nokia Mobile Phones (FIN)
; 12/11/02 - Tero Leskinen - Done IT (FIN)
; removed cc:Mail sections
; some adjustments done while debugging with R5 and W2K
; NOTE: Add XPC_Disable_IOCP=1 to notes.ini when using NCP with R5!
; Tested with 5.0.8 and 5.0.11
;
; NB. This .MDM file has not been officially tested by Lotus Development Ltd
; It can be used freely but does not legally warrant support until
; such at time that it is officially tested and authorised by Lotus.


[attributes]

MODELS=Nokia Cardphone 2.0 (Max. 28.8 Kbps)
NULL MODEM=0
MAXIMUM SPEED=115200
DEFAULT SPEED=115200
FIXED SPEED=1

[commands]

ESCAPE=+++
ATTENTION=ATE0V1
HANGUP=ATH0
SETUP=AT&FQ0E0V1
SETUP=AT&D3&C1S0=0S7=60X5
VOLUME OFF=ATM
VOLUME LOW=ATM
VOLUME MEDIUM=ATM
VOLUME HIGH=ATM
RTS/CTS ENABLED=AT&K3
RTS/CTS IGNORED=AT&K
ANSWER=ATA
AUTO PULSE DIAL=ATD
AUTO TONE DIAL=ATD
AUTO DIAL SUFFIX=,

[responses]

OK=OK
OK=0
BUSY=BUSY
BUSY=DELAYED
BUSY=13
NO ANSWER=NO ANSWER
NO ANSWER=8
NO CARRIER=NO CARRIER
NO CARRIER=4
NO DIALTONE=NO DIALTONE
NO DIALTONE=NO DIAL TONE
ERROR=ERROR
ERROR=4
RING=RING
RING=2

CARRIER,,115200=CARRIER*

CONNECT, 28800=CONNECT 28800
CONNECT, 28800=16
CONNECT, 19200=CONNECT 19200
CONNECT, 19200=15
CONNECT, 14400=CONNECT 14400
CONNECT, 14400=14
CONNECT, 9600=CONNECT 9600
CONNECT, 9600=12
CONNECT, 4800=CONNECT 4800
CONNECT, 4800=11
CONNECT, 2400=CONNECT 2400
CONNECT, 2400=10
CONNECT, 1200=CONNECT 1200
CONNECT, 1200=5