Problem in registering the Eseries VOIP built-in client.

[hazmat]

I've a Cisco Unified CallManager up and running.Successfull in recieving a call from cisco extension to X-Lite SIP soft phone.

Now i'm trying to register Built-in E65 VOIP client with CMM 5.But client registration is failing on E65 phone.Phone is connected to Wirless Network.Please let me know any setting i'm missing in cmm 5 or any thing i need to set on my phone.


Thanks in advance ,

Haroon Azmat

[wangdhb]

I have same problem.
X-LITE succeed to register CME 4.0 & CCM 5.1.
I confirm the configuration is correct on the E60.because I had succeed register another SIP SERVER,no problem.
there is no NAT on the route, just WLAN access point.

anybody can help us?


Receiving error 401 Unauthorized

Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.1.24.56:5060;branch=z9hG4bKtb2uiopht1hc6cef0avvjfn
From: <sip:5052@10.1.0.230>;tag=06iuiovdedhc6l110avv
To: <sip:5052@10.1.0.230>
Date: Mon, 21 May 2007 10:28:44 GMT
Call-ID: l9DFoUmuoIfo4wa_-s0PamIbVolbtt
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1172 REGISTER
Content-Length: 0

Sent:
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 10.1.24.56:5060;branch=z9hG4bKtb2uiopht1hc6cef0avvjfn
From: <sip:5052@10.1.0.230>;tag=06iuiovdedhc6l110avv
To: <sip:5052@10.1.0.230>;tag=22FB1DD8-18B7
Date: Mon, 21 May 2007 10:28:44 GMT
Call-ID: l9DFoUmuoIfo4wa_-s0PamIbVolbtt
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1172 REGISTER
WWW-Authenticate: Digest realm="",nonce="53B9E1C0037F82FC",algorithm=MD5,qop="au
th"
Content-Length: 0

[wmseto]

Hello, my understanding is for CCMP, Cisco can provide a CCMP plugin for Nokia S60 3rd edition phones. (And you will need that). I apologize that I don't know the full details of the implementation, but I believe this plugin/package can only be distribute by Cisco. I think the first step if to connect with your Cisco contact.

Please come back here if you find out there are something Forum Nokia can do

[wangdhb]

Do you mean this software?
'Nokia Intellisync Call Connect 1.0 for Cisco'

thx for your reply.

[hazmat]

Hi all,

I've contacted Cisco regarding this and found that they enable the E-Series SIP support in Communication Manager 6 not in version 5 or 4. Second apart from that i spent time to trace the actual problem and start a new thread if Nokia pay attention then we can fix this problem. The detail of this thread is mentioned in below link and i'm looking for a way to remove a Supported header from Registration request.

http://discussion.forum.nokia.com/fo...ghlight=haroon

Haroon

[anushree]

hye can ne1 tell me how to get this sip message sent? as in this
sip 200 ok....

thanx