Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User aidj's Avatar
    Join Date
    Mar 2003
    Posts
    17
    Hi.

    We are currently developing an application that sends MMS message to recipients or to email addresses.

    Is it possible to add another recipient which consists of IP address and port number?

    The list of recipient as following:

    0) 127.0.0.1:7000/TYPE=IPv4
    1) +358990000005/TYPE=PLMN
    2) 123.124.125.125/TYPE=IPv4
    3) 1234:5678:90AB:CDEF:FEDC:BA09:8765:4321/TYPE=IPv6
    4) john.doe@nokia.com

    We would be appreciated for your help.

    Thanks in advance.


    Additional Information
    ----------------------

    Scenario 001:

    The originator of the message (sender) is an Mobile Station (MS), an MMS-capable terminal, or an application.

    An example of a processing application could be a cola-company sponsored type of service when user are allowed to send MMS-messages for cheaper than normal.

    These message are all routed through a filtering (processing) application which tacks a small logo of the cola-company onto the end/beginning of the message content.

    Additionally, the filtering application can be synchronous or asynchronous.

    The EAIF may also send headers, without the message body, to the filtering application.

    The EAIF may also receive status, without header, from the filtering application.

    After the message is processed the EAIF is able to receive the response and the modified content from the filtering application before it is sent to destination (the receiving MS).


    Notes:

    In mobile originated (MO) transactions, the sender is MS.
    The message can terminate directly to an MS or go to an email address.
    It can be sent to an application which does the conversion.
    After the conversion the message is sent to its destination.

    In mobile terminated (MT) transactions, the message is sent to an MS.
    The originator of the message can be another MS or an application.

    In application originated (AO) transactions, the sender is an application.
    The message can be terminated directly to an MS or to another application.
    The message can be processed in one or more applications before it is sent to the receiving MS.

    In application terminated (AT) transactions, the message receiver is an application.
    The message originator can be an MS or another application.

    (Extract from How to Create MMS Services, pg 12-13).


    P/S: We've read the similar question as following:

    Sending MMS reply to "sender" by EPOC via MMSC EAIF
    http://nkn.forum.nokia.com/devrel/threadshow.cfm?mb=7196980017575480&msg=3707836891755955&page=1


    We don't know if we can be really helpful, but information and answers as above may be useful to others.

  2. #2
    Nokia Developer Moderator enstedt's Avatar
    Join Date
    Mar 2003
    Location
    Tampere, Finland
    Posts
    1,113
    Hi,

    > Is it possible to add another recipient which consists of IP address and port number?

    Yes.

    Best regards,
    V / Forum Nokia

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Nokia Developer aims to help you create apps and publish them so you can connect with users around the world.

京ICP备05048969号  © Copyright Nokia 2013 All rights reserved