Secure element keysets

[think_75]

Hello,

In order to have a backup solution if by mistake we are blocking the secure element keyset 42, is there any way to update another keyset with the same keys (for instance keyset 1)? or to create a new one?
If yes which PUT KEY commands needs to be sent to the SE?

Thanks in advance for your help.

[super_beda]

Are you talking about internal MIfare?
If so I have also a similar problem..
I'm not sure if my keyset 42 is blocked but when I try to upload my .cap file the card answers me

<= 69 85 i.
Status: Conditions of use not satisfied
jcshell: Error code: 6985 (Conditions of use not satisfied)
jcshell: Wrong response APDU: 6985

I'm using JCOP tools 2.2.1 and OmniKey CM 5321.
What am I doing wrong?
Any advice?
Thanx in advance

[lovercjs]

I used GPShell to upload the applet and it work fine. Does JCOP open secure channel with proper authentication before installing?

[super_beda]

Yes,it seems authentication is ok..
after setting the keys here is the JCShell log:

cm> init-update 42
=> 80 50 2A 00 08 2C 7B D0 32 88 58 DB 4B 00 .P*..,{.2.X.K.
(110639 usec)
<= 00 00 71 34 D0 E6 56 E9 39 18 2A 02 00 06 9F B2 ..q4..V.9.*.....
2B A8 F3 F1 EE 58 35 AC 95 5B 30 CC 90 00 +....X5..[0...
Status: No Error
cm> ext-auth enc
=> 84 82 03 00 10 5C 9E 4E 88 C2 1A BB 0E 8A 0C B8 .....\.N........
A6 91 A6 CC 07 .....
(42119 usec)
<= 90 00 ..
Status: No Error

Any advice?