Hi,

I just received a profile and I decoded to orginal XML, which contains following stuff:
...
<characteristic type="NAPDEF">
<parm name="NAPID" value="NAP2">
</parm>
<parm name="NAME" value="a_xxxxx_internet">
</parm>
<parm name="BEARER" value="GSM-GPRS">
</parm>
<parm name="INTERNET">
</parm>
<parm name="NAP-ADDRESS" value="internet.xxxxx.com">
</parm>
<parm name="NAP-ADDRTYPE" value="APN">
</parm>
</characteristic>
...

But I failed to send email using this profile. Compared to default setting in the device, I found that the username and password fields are missing, which means the provisioning content should have something like this(red part):
...
<characteristic type="NAPDEF">
<parm name="NAPID" value="NAP2">
</parm>
<parm name="NAME" value="a_xxxxx_internet">
</parm>
<parm name="BEARER" value="GSM-GPRS">
</parm>
<parm name="INTERNET">
</parm>
<parm name="NAP-ADDRESS" value="internet.xxxxx.com">
</parm>
<parm name="NAP-ADDRTYPE" value="APN">
</parm>
<characteristic type="NAPAUTHINFO">
<parm name="AUTHTYPE" value="PAP">
</parm>
<parm name="AUTHNAME" value="xxx">
</parm>
<parm name="AUTHSECRET" value="xxx">
</parm>
</characteristic>
</characteristic>
...

But the operator said that it should work even if without username and password field.
Could anyone tell me what's special for NAP with "INTERNET" param?

Thanks in advance.