Is this code bound to work on phone?

**gigglie** · 2008-02-25, 10:08

I am working on SDK 2 fp3 and this code worked ok on my emulator /machine , but for phone I am doubtfull as it is not showing the desired result . If not how should it be made to work . I am trying specifically N70 for testing.

Code:

void CPMHttpEngine::LoadIapsL()
	{
	// open commdb
	CCommsDatabase* commDb = CCommsDatabase::NewL(EDatabaseTypeIAP);
	CleanupStack::PushL(commDb);

	open IAP table
	CCommsDbTableView* commView = commDb->OpenIAPTableViewMatchingBearerSetLC(ECommDbBearerCSD|ECommDbBearerGPRS|ECommDbBearerPAN,ECommDbConnectionDirectionOutgoing);
	CleanupStack::PushL(commView);
	search all IAPs
	if (commView->GotoFirstRecord() == KErrNone)
		{
		do
			{
			TIap iap;
			_LIT(KIAPName,"Ethernet");
			iap.iName.Copy(KIAPName());
			iap.iId=1;
			commView->ReadTextL(TPtrC(COMMDB_NAME), iap.iName);
			commView->ReadUintL(TPtrC(COMMDB_ID), iap.iId);
			User::LeaveIfError(iIAPs.Append(iap));
			}
		while (commView->GotoNextRecord() == KErrNone);
		}
	CleanupStack::PopAndDestroy(commView);
	CleanupStack::PopAndDestroy(commDb);
	}

This is a working code for N73 where I added parts.

**LAS_VEGAS** · 2008-02-25, 10:25

iap.iName and iap.iId are overwritten by ReadTextL and ReadUintL calls. If you are trying to create new access point check this.

If you want to read access point settings, iap will hold the settings of the last access point, so while loop is meaningless.

If you want to overwrite an existing access point use WriteTextL and WriteUintL.(btw if you do so all access points will be overwritten because of the while loop)

**gigglie** · 2008-02-25, 11:19

Oh I have an IAP list and in N70 the phone is supposed to take in the default 1 that connects to www.google.com say in Web or services , so technically I do not have to input 1 . I was only using the hard coded value as I cannot get the correct IAP . When I added a new bearer say "ECommDbBearerPAN" one IAP was read from the list , before no IAP was being accessed .

I said the code used before was working as it was connecting through winsock there but I cannot find such socket in the IAP list . In emulator it connects through "Ethernet"

**gigglie** · 2008-02-25, 11:29

This is the result of CEDDUMP

Code:

############################################################
## AUTO-GENERATED CONFIGURATION FILE
## CommDB Database Dump Utility
## 1.1
############################################################

############################################################
## Network
## 
[Network]
ADD_SECTION
# COMMDB_ID = 1
	Name=Ethernet LAN network
	FIELD_COUNT=1
END_ADD


############################################################
## ModemBearer
## 
[ModemBearer]

############################################################
## LANBearer
## 
[LANBearer]
ADD_SECTION
# COMMDB_ID = 1
	Name=LAN_bearer_1
	Agent=NullAgt
	IfName=ethint
	LDDFilename=ethercard
	LDDName=EtherCard
	PDDFilename=etherwins
	PDDName=Ethercard.wins
	PacketDriverName=EtherPkt
	LastSocketActivityTimeout=600
	LastSessionClosedTimeout=600
	LastSocketClosedTimeout=600
	FIELD_COUNT=11
END_ADD


############################################################
## Location
## 
[Location]
ADD_TEMPLATE
	Name=Default Location
	IntlPrefixCode=+
	NatPrefixCode=0
	NatCode=44
	Mobile=TRUE
	UsePulseDial=FALSE
	WaitForDialTone=FALSE
	PauseAfterDialout=0
	FIELD_COUNT=8
END_TEMPLATE

ADD_SECTION
# COMMDB_ID = 2
	Name=Office
	IntlPrefixCode=00
	NatPrefixCode=0
	NatCode=44
	AreaCode=171
	DialOutCode=9,
	Mobile=FALSE
	UsePulseDial=FALSE
	WaitForDialTone=FALSE
	PauseAfterDialout=0
	FIELD_COUNT=10
END_ADD

ADD_SECTION
# COMMDB_ID = 3
	Name=Office Direct Dial
	IntlPrefixCode=00
	NatPrefixCode=0
	NatCode=44
	AreaCode=171
	Mobile=FALSE
	UsePulseDial=FALSE
	WaitForDialTone=FALSE
	PauseAfterDialout=0
	FIELD_COUNT=9
END_ADD

ADD_SECTION
# COMMDB_ID = 4
	Name=Mobile
	IntlPrefixCode=+
	NatPrefixCode=0
	NatCode=44
	Mobile=TRUE
	UsePulseDial=FALSE
	WaitForDialTone=FALSE
	PauseAfterDialout=0
	FIELD_COUNT=8
END_ADD

ADD_SECTION
# COMMDB_ID = 5
	Name=Home
	IntlPrefixCode=00
	NatPrefixCode=0
	NatCode=44
	AreaCode=181
	Mobile=FALSE
	UsePulseDial=TRUE
	WaitForDialTone=TRUE
	PauseAfterDialout=0
	FIELD_COUNT=9
END_ADD


############################################################
## Chargecard
## 
[Chargecard]
ADD_SECTION
# COMMDB_ID = 1
	Name=Dummy BT Chargecard
	AccountNumber=144,12345678
	Pin=0000
	LocalRule=HG
	NatRule=HFG
	IntlRule=HEFG
	FIELD_COUNT=6
END_ADD

ADD_SECTION
# COMMDB_ID = 2
	Name=Dummy Mercury Chargecard
	AccountNumber=0500800800,,12345678
	Pin=****
	LocalRule=HG
	NatRule=J,K,0FG
	IntlRule=HEFG
	FIELD_COUNT=6
END_ADD


############################################################
## GlobalSettings
## 
[GlobalSettings]
ADD_SECTION
	WAPAccessPoint=1
	RedialAttempts=0
	SmsBearer=3
	SmsReceiveMode=2
	GPRSAttachMode=1
	AcceptIncomingGprs=1
	GPRSClassCBearer=GSM
	ConnectionAttempts=1
	ModemForDataAndFax=3
	ModemForPhoneServicesAndSMS=3
	LocationForDataAndFax=2
	LocationForPhoneServicesAndSMS=3
	DefaultNetwork=1
	BearerAvailabilityCheckTSY=PHONETSY
	FIELD_COUNT=14
END_ADD


############################################################
## DialOutISP
## 
[DialOutISP]

############################################################
## DialInISP
## 
[DialInISP]

############################################################
## OutgoingGPRS
## 
[OutgoingGPRS]

############################################################
## IncomingGPRS
## 
[IncomingGPRS]

############################################################
## DefaultGPRS
## 
[DefaultGPRS]

############################################################
## CDMA2000PacketServiceTable
## 
[CDMA2000PacketServiceTable]

############################################################
## DefaultCDMA2000SettingsTable
## 
[DefaultCDMA2000SettingsTable]

############################################################
## LANService
## 
[LANService]
ADD_SECTION
# COMMDB_ID = 1
	Name=Ethernet
	IfNetworks=ip,ip6
	IpNetMask=0.0.0.0
	IpGateway=0.0.0.0
	IpAddrFromServer=FALSE
	IpAddr=0.0.0.0
	IpDNSAddrFromServer=FALSE
	IpNameServer1=0.0.0.0
	IpNameServer2=0.0.0.0
	Ip6DNSAddrFromServer=FALSE
	FIELD_COUNT=10
END_ADD


############################################################
## IAP
## 
[IAP]
ADD_SECTION
# COMMDB_ID = 1
	Name=Ethernet
	IAPService=1
	IAPServiceType=LANService
	IAPBearer=1
	IAPBearerType=LANBearer
	IAPNetwork=1
	IAPNetworkWeighting=0
	Location=2
	FIELD_COUNT=8
END_ADD


############################################################
## ConnectionPreferences
## 
[ConnectionPreferences]
ADD_SECTION
	Ranking=1
	Direction=OUTGOING
	DialogPref=PROMPT
	BearerSet=LAN
	IAP=1
	FIELD_COUNT=5
END_ADD


############################################################
## BTDeviceTable
## 
[BTDeviceTable]

############################################################
## BTSecurityTable
## 
[BTSecurityTable]

############################################################
## BTDefaultTable
## 
[BTDefaultTable]

############################################################
## Proxies
## 
[Proxies]
ADD_SECTION
# COMMDB_ID = 1
	ISP=1
	ProxyServiceType=LANService
	UseProxyServer=FALSE
	ProxyServerName=www.dummyproxy.com
	ProtocolName=http
	PortNumber=80
	Exceptions=www.dummyproxy.com/exception
	FIELD_COUNT=7
END_ADD


############################################################
## AgentLookup
## 
[AgentLookup]

############################################################
## WAPAccessPoint
## 
[WAPAccessPoint]
ADD_TEMPLATE
	Name=Default Dial In ISP
	CurrentBearer=WAPIPBearer
	FIELD_COUNT=2
END_TEMPLATE

ADD_SECTION
# COMMDB_ID = 2
	Name=NT RAS with Null Modem
	CurrentBearer=WAPIPBearer
	StartPage=www.wapstart.com
	FIELD_COUNT=3
END_ADD

ADD_SECTION
# COMMDB_ID = 3
	Name=Direct PPP
	CurrentBearer=WAPIPBearer
	StartPage=www.wapstart.com
	FIELD_COUNT=3
END_ADD

ADD_SECTION
# COMMDB_ID = 4
	Name=Ethernet LAN
	CurrentBearer=WAPIPBearer
	StartPage=www.wapstart.com
	FIELD_COUNT=3
END_ADD


############################################################
## WAPIPBearer
## 
[WAPIPBearer]
ADD_TEMPLATE
	AccessPointId=0
	IAP=0
	WSPOption=CONNECTIONLESS
	Security=FALSE
	ProxyPortNumber=0
	FIELD_COUNT=5
END_TEMPLATE

ADD_SECTION
# COMMDB_ID = 2
	AccessPointId=2
	GatewayAddress=www.wapgateway.com
	IAP=1
	WSPOption=CONNECTIONORIENTED
	Security=FALSE
	ProxyPortNumber=1
	FIELD_COUNT=6
END_ADD

ADD_SECTION
# COMMDB_ID = 3
	AccessPointId=3
	GatewayAddress=0.0.0.0
	IAP=2
	WSPOption=CONNECTIONORIENTED
	Security=FALSE
	ProxyPortNumber=1
	FIELD_COUNT=6
END_ADD

ADD_SECTION
# COMMDB_ID = 4
	AccessPointId=4
	GatewayAddress=0.0.0.0
	IAP=3
	WSPOption=CONNECTIONORIENTED
	Security=FALSE
	ProxyPortNumber=1
	FIELD_COUNT=6
END_ADD


############################################################
## WAPSMSBearer
## 
[WAPSMSBearer]
ADD_TEMPLATE
	AccessPointId=0
	WSPOption=CONNECTIONLESS
	Security=FALSE
	FIELD_COUNT=3
END_TEMPLATE

ADD_SECTION
# COMMDB_ID = 2
	AccessPointId=2
	GatewayAddress=+4412345678901
	ServiceCentreAddress=+442071234567
	WSPOption=CONNECTIONORIENTED
	Security=FALSE
	FIELD_COUNT=5
END_ADD


############################################################
## SecureSocketTable
## 
[SecureSocketTable]
ADD_SECTION
# COMMDB_ID = 1
	ProtocolName=ssl3.0
	ProtoLibrary=ssladaptor.dll
	FIELD_COUNT=2
END_ADD

ADD_SECTION
# COMMDB_ID = 2
	ProtocolName=tls1.0
	ProtoLibrary=ssladaptor.dll
	FIELD_COUNT=2
END_ADD


############################################################
## BTPersistTable
## 
[BTPersistTable]

############################################################
## VirtualBearer
## 
[VirtualBearer]

############################################################
## VpnService
## 
[VpnService]

############################################################
## WLANServiceExtensionTable
## 
[WLANServiceExtensionTable]
############################################################
## ERROR
## AccessTypeTable
############################################################
############################################################
## ERROR
## Error opening table
############################################################
############################################################
## ERROR
## Unable to find the specified object or missing required field values
############################################################

**LAS_VEGAS** · 2008-02-25, 11:46

Hmm...Did you check if the accesspoint named 'Ethernet' exists on N70?

Make sure, you are using a working access point(check with the browser for instance)...

Discussion Board

Thread: Is this code bound to work on phone?

Thread Tools

Search Thread

Rate This Thread

Display

Similar Threads

6270 MIDP SocketConnection test work fine on emulator but fail on real phone

OMA DRM media transfer using PC to Phone using USB

is 9.2 verstion code will work on 9.1 verstion os?

Fixing a bug in an already obfuscated midlet (no source code) ?

Posting Permissions