Unable to make a data call

[nbrunner]

Hello,

I'm using a Nokia 2730 classic connected to a PC via USB and i send AT command to it.
When i try to make a data call with ATD without semicolon, it make a voice call.
Anyone know why or have a solution ?

Thanks for the reading.

[Maveric]

Hello,

I'm using a Nokia 2730 classic connected to a PC via USB and i send AT command to it.
When i try to make a data call with ATD without semicolon, it make a voice call.
Anyone know why or have a solution ?

Thanks for the reading.

Hello nbrunner,

This is how it should go: with voice calls semicolon is required.
Now, when you initiate an ATD command without semicolon, it
should be a DATA call by default.


Hope this helps?

Best Regards,

[nbrunner]

Hello nbrunner,

This is how it should go: with voice calls semicolon is required.
Now, when you initiate an ATD command without semicolon, it
should be a DATA call by default.


Hope this helps?

Best Regards,

Thanks for the response.
I have try it without semicolon but it's still make a voice call.

[symbianyucca]

Data calls are not generally well supported, you could propably find quite a many discussions on teh topic if you would do a bit of searching in this forum. Also AT commands are generally not fully supported by majority of the devices.

[nbrunner]

i found a solution, i need to send "AT+CBST=71" before calling.