6131 NFC unlock midlet failing http post fail

[acardy]

Hi all,

Yesterday we tried unlocking a new 6131 NFC with our unlock midlet 0.91... and we recieved this error:

---

The process of unlocking the secure element was not completed. Source HTTP Post Failed.

Serial: xxx etc

Application will now exit

---

With tested other phones and other sims with the same error. We also have a GPRS connection. We tried again today with the same error still appearing. This was working less than a month ago. Anyone else having similar problems?

We've also downloaded the latest unlock midlet 1.0 and tried that but still no luck.

I know other people have had HTTP post errors in the forums, so solutions please!!!!

Thanks in advance!

Andy.

[acardy]

Hi all,

Just as an update to this thread, the problem seems to have resolved its self and we can unlock phones without the error!

Weird!

[collet.kudze]

Using Nokia 6212 classic , I am facing the same problem you described below with this device:

>>
The process of unlocking the secure element was not completed. Source HTTP Post Failed.

Serial: xxx etc

Application will now exit
>>>>

Now i have attempted this twice.I am advised that if i try again and it fails, it might lock the Secure Element.
Please advise what causes the problem above. If i execute the Data Connectivity Test, http POST passes.

Can you also advise also what can happen if its correct that a 3rd failure may cause the SE to lock permanently

Regards
Collet

[scc]

Hi,

did you solve this problem?

I have the same and have posted here,

http://discussion.forum.nokia.com/fo...d.php?t=124397

Cheers

[venkatrv75]

I am too facing the same Http post failed error. Using T-mobile(US) connection.
"Configuration--> Default config. setting" is "T-MO WEB" and
"Configuration--> "Personal config. settings -->Bearer settings-->Packet data Access point" as internet3.voicestream.com. Network type is IpV4.

Firmware version is 5.12

Transffered unlock midlet files to phone using bluetooth. I always keep getting "Http post error".
Started to worry that we may need to scrap the project. Any help is greately appreciated.


thanks
Venkat

[scc]

I am too facing the same Http post failed error. Using T-mobile(US) connection.
"Configuration--> Default config. setting" is "T-MO WEB" and
"Configuration--> "Personal config. settings -->Bearer settings-->Packet data Access point" as internet3.voicestream.com. Network type is IpV4.

Firmware version is 5.12

Transffered unlock midlet files to phone using bluetooth. I always keep getting "Http post error".
Started to worry that we may need to scrap the project. Any help is greately appreciated.


thanks
Venkat

Hi,

change the network provider and see if it works.

[venkatrv75]

I tried with T-mobile, Cingular and also spoke with their customer reps to make sure I am using the right gprs. Nothing helped. The firmware version is 5.12 and I noticed people who said it worked are at 5.11. This MAY BE the reason.
What a frustation!!

[venkatrv75]

finally, i could resolve the issue. Returned the old phone and got a new one and it worked in first attempt.

[fjroldan09]

Hello,

The service we used for unlock the secure element is Nokia NFC Unlock Service MIDlet but, it never ends because appear the following messages:

"The process of unlocking the secure element was not completed". "Source HTTP Post Failed".

We think that is the connection to the 3G (or GPRS) and we try this:

Preferred access point: internet.comcel.com.co
"internet" settings from Comcel MMS: Single-shot WEB Comcel 3GSM.

Also we try that with Movistar that is annother 3G Colombia provider.

Could someone please help me with this troubles?