Nokia 6300i with Voip - other than Gizmo5

[Soegaard]

Hi Sudude,
It works!!!
I will thank you very much for your helpness in this matter.
Now I can use my mobile as Nokia has promissed in their advertisment.

Once more
Kindly regards
Ove, Denmark

Okey, looking forward for your test results (hoping the best )

[sudude]

Soegaard & Betalaga, Excellent to hear that your VoIP providers works now

Magisterlindus, I could take a look at it next week when I have access to Wi-Fi again.

[magisterlindus]

Magisterlindus, I could take a look at it next week when I have access to Wi-Fi again.

OK thanks very much, I'll stay tuned.

[magisterlindus]

I did it! I'm so proud of myself...
The only issue is now that I have no idea why this time it worked and that's quite scary. I guess all's well that ends well...

[sudude]

Magisterlindus, thats great. Can you share the xml you got working incase someone else is trying to solve same issue?

[magisterlindus]

Magisterlindus, thats great. Can you share the xml you got working incase someone else is trying to solve same issue?

Sure I can! Here you go:

<?xml version="1.0"?>
<!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN"
"http://www.wapforum.org/DTD/prov.dtd">
<wap-provisioningdoc version="1.1">
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<characteristic type="BOOTSTRAP">
<parm name="NAME" value="Messagenet" />
</characteristic>
<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- Nokia S40 v72 VoIP settings, w9013 -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w9013"/>
<parm name="PROVIDER-ID" value="Messagenet"/>
<parm name="NAME" value="Messagenet"/>
<parm name="TO-NAPID" value="INTERNET"/>
<parm name="TO-APPREF" value="Messagenet_SIP_settings"/>
<parm name="SMPORT" value="16384"/>
<parm name="EMPORT" value="32766"/>
<parm name="MEDIAQOS" value="46"/>
<parm name="SECURECALLPREF" value="0"/>
<parm name="RTCP" value="0"/>
<parm name="MOMAXALERT" value="45"/>
<parm name="MTMAXALERT" value="30"/>

<!-- AMR NB -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="0"/>
<parm name="PRIORITYINDEX" value="0"/>
<parm name="OCTET-ALIGN"/>
<parm name="VAD"/>
</characteristic>

<!-- G.729 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="10"/>
<parm name="PRIORITYINDEX" value="1"/>
<parm name="ANNEXB"/>
</characteristic>

<!-- G711 a-law with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="3"/>
<parm name="PRIORITYINDEX" value="2"/>
<parm name="VAD"/>
</characteristic>

<!-- G711 u-law with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="4"/>
<parm name="PRIORITYINDEX" value="3"/>
<parm name="VAD"/>
</characteristic>

<!-- G.726-40 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="5"/>
<parm name="PRIORITYINDEX" value="4"/>
<parm name="VAD"/>
</characteristic>

<!-- G.726-32 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="6"/>
<parm name="PRIORITYINDEX" value="5"/>
<parm name="VAD"/>
</characteristic>

<!-- G.726-24 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="7"/>
<parm name="PRIORITYINDEX" value="6"/>
<parm name="VAD"/>
</characteristic>

<!-- G.726-16 with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="8"/>
<parm name="PRIORITYINDEX" value="7"/>
<parm name="VAD"/>
</characteristic>

<!-- CN Comfort noise with default values -->
<characteristic type="CODEC">
<parm name="MEDIASUBTYPE" value="9"/>
<parm name="PRIORITYINDEX" value="8"/>
</characteristic>

<!-- IP Voice mail -->
<characteristic type="VOIPURIS">
<!-- Link to SIP settings -->
<parm name="TO-APPREF" value="Messagenet_SIP_settings"/>
<parm name="IPVOICEMAILBOXURI" value="USERNAME"/>
</characteristic>
</characteristic>

<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- NAT/FW settings, w902E -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w902E"/>
<parm name="NAME" value="NAT/FW Traversal settings"/>
<characteristic type="NW">
<parm name="APPREF" value="Messagenet_NAT_FW_settings"/>
<parm name="DOMAIN" value="messagenet.it"/>
<parm name="STUNSRVADDR" value="212.97.59.76"/>
<parm name="STUNSRVPORT" value="3478"/>
<parm name="NATREFRESHTCP" value="30"/>
<parm name="NATREFRESHUDP" value="20"/>
</characteristic>
<characteristic type="NATIAP">
<parm name="TO-NAPID" value="INTERNET"/>
<parm name="REFRESHTCP" value="1200"/>
<parm name="REFRESHUDP" value="28"/>
<parm name="STUNRETRANSMIT" value="250"/>
</characteristic>
</characteristic>

<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
<!-- SIP settings, w9010 -->
<characteristic type="APPLICATION">
<parm name="APPID" value="w9010"/>
<parm name="APPREF" value="Messagenet_SIP_settings"/>
<parm name="PROVIDER-ID" value="Messagenet.it"/>
<parm name="TO-NAPID" value="WI-FI"/>
<parm name="PTYPE" value="IETF"/>
<parm name="PUID" value="USERNAME@212.97.59.76"/>
<parm name="APROTOCOL" value="UDP" />
<!-- Outbound settings -->
<characteristic type="APPADDR">
<parm name="LR"/>
<parm name="ADDR" value="212.97.59.76"/>
<characteristic type="PORT">
<parm name="PORTNBR" value="5061" />
</characteristic>
</characteristic>
<!-- Outbound credentials -->
<characteristic type="APPAUTH">
<parm name="AAUTHNAME" value="USERNAME"/>
<parm name="AAUTHSECRET" value="PASSWORD"/>
<parm name="AAUTHDATA" value="212.97.59.76"/>
<parm name="AAUTHTYPE" value="HTTP-DIGEST" />
</characteristic>
<!-- Registrar location and credentials -->
<characteristic type="RESOURCE">
<parm name="URI" value="sip.messagenet.it"/>
<parm name="AAUTHNAME" value="USERNAME"/>
<parm name="AAUTHSECRET" value="PASSWORD"/>
<parm name="AAUTHDATA" value="212.97.59.76"/>
<parm name="AAUTHTYPE" value="HTTP-DIGEST" />
</characteristic>
</characteristic>

<!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
</wap-provisioningdoc>

The only thing I didn't manage to setup is the callerid. Is it possible that my VoISP just doesn't support it?

[traud]

magisterlindus, incoming or outgoing caller-ID? Menu » Settings » Call » Send net caller ID

[boris_luptak]

Hi, could someone please give me a hint on how to send the prepared .prov file to the phone? No matter what I try (including OBEX push) the file ends up in gallery - and I do not see any way of putting it to the phone.

thanx a lot in advance.

[traud]

Boris, make sure the file extension is .prov and there is no other perhaps invisible extension. Which Bluetooth software (Apple, Microsoft, Broadcom/Widcomm, IVT, Toshiba, AVM, …) do you use?

[boris_luptak]

Hi Traud,
I am using Toshiba bluetooth. And I finaly managed to get it working .... In the object push application ( which allows me to send just business card ) I have changed the business card file to the created .prov and then sent the business card to the phone ... and that works.

Thanx for help.

[josefkalous]

Hi all,
thanks to this thread I finally managed to work my VoIP account by our local provider RETEcall. Many thanks to all, specially to traud and sudude!
I'm from Czech Republic.

[Michael924]

Hello,

I have a little problem with the voip account on my 6300i too. I want to connect to sipgate.
On my old voip phone I just deactivated the stun server, then the phone connected to my provider.
how can i deactivate the stun server in the xml-file for the 6300i?

thanks a lot for your help.

michael924

[sudude]

You can deactivate the STUN server by setting it to zero IP under the STUn settings in the XML e.g.

<parm name="STUNSRVADDR" value="0.0.0.0"/>

Hope it helps.

[betalaga]

hi,
is possible configure the 6300i with skype account?

[asannucci]

hi all,

I have a problem when upload the example.prov file from my computer to my nokia 6300i. I select the file then choose send-to and choose my nokia 6300i. The file going to my nokia but don't appear the option to accept the new configuration.

Anyone can help me?

Thank you in advance.

- Andrea -