second drum channel in sp-midi-ringtones

[b375]

hi!

can anyone please tell me how to configure channel 11 in an sp-midi-ringtone to be played with drumsounds? as far as I know, it is possible to designate ch. 11 as second drum channel, but on all phones i test it on it is played with a piano-sound (which sounds nasty...), when I configure the file as follows:

1. the sysex-message with the mips;
2. program changes
3. bank selects for channel 11: msb: 120; lsb: 0
4. velocities
5. midi-events.

i use logic platinum and choose instrument no. 1 as program change for channel 11.

if anyone could solve this problem, i'd be deeply grateful!

regards,
b375

[tamarafoubert]

Have you used control change 0 with MSB value 120 and control change 32 with LSB value 0 ? Try putting program change with value 1 for channel 11 after the bank selects...

Hope this helps,
Tamara
Ringtone Producers Alliance