install compiled raccoon for my 5700,"system error"

[wangdayong326]

Hi guys,

I compiled the source code of raccoon0.11.0 and it worked ok on the emulator,but when I installed the compiled .sis file on my 5700 and clicked the raccoon icon,there was a "system error" ,and without any error data.I'am a begginer of symbian,could anyone tell me the reason or give me a indicate?

best regards

wangdy

ps:
this is my compile environment
sdk:3rd fp1
raccon source version 0.11.0
IDE:carbide 1.3

the commands I used are:

make selfsigned
bldmake bldfiles
abld build gcce
abld freeze gcce
abld build gcce urel

I have freezed DLL interface and changed the UID3 into 0xExxxxxxx.Also,I used the selfsigned capability,and I have signed the .sis file through www.symbiansigned.com.

[jhnwkmn]

I compiled the source code of raccoon0.11.0 and it worked ok on the emulator,but when I installed the compiled .sis file on my 5700 and clicked the raccoon icon,there was a "system error" ,and without any error data.I'am a begginer of symbian,could anyone tell me the reason or give me a indicate?

Chances are that it's gcce that is the problem.

Namely, it used to be so that at gcce built Raccoon simply did not work, and circumstantial evidence suggested that there was some problem with the gcce toolchain related to the handling of static data in DLLs.

For a while I provided libraries for gcce in the Raccoon SDK, because a gcce built module worked together with a RVCT built Raccoon, provided (it appeared) the amount of static data in the gcce built module was not too large.

Johan

[wangdayong326]

Hi jhnwkmn,thank you very much for your reply.Also,

Chances are that it's gcce that is the problem.

Namely, it used to be so that at gcce built Raccoon simply did not work, and circumstantial evidence suggested that there was some problem with the gcce toolchain related to the handling of static data in DLLs.

I just want to know whether the released raccoon .sis package was complied by gcce or other complier such as rvct,or others?

For a while I provided libraries for gcce in the Raccoon SDK, because a gcce built module worked together with a RVCT built Raccoon, provided (it appeared) the amount of static data in the gcce built module was not too large.

Johan

waiting for your libraries!

regards

wangdy

[jhnwkmn]

I just want to know whether the released raccoon .sis package was complied by gcce or other complier such as rvct,or others?

rvct

waiting for your libraries!

I'll try to make the gcce libraries available in the next release.

Johan

[wangdayong326]

Hi Johan,

Thank you very much for your help!
Best regards

wangdy

[jhnwkmn]

Thank you very much for your help!

Come to think of it, you don't actually need those libraries, because you have already built them yourself (my intention is still to include them in the next release).

Assuming what you actually want is to build an Apache module of your own, you can do that using the gcce environment you have created, and then load that module into the rvct prebuilt Apache found at SourceForge.

The thing is that Symbian supports two ABIs - abiv1 and abiv2 - that are buildtime incompatible, but runtime compatible. So, while you cannot use rvct (abiv1) generated libraries when building using gcce (abiv2), it's fine to combine at runtime DLLs and EXEs built using different abi-version toolchains.

Johan