Not found Mif & BMP

[mockba]

When I build my project using 3rd_FP1 I get the following errors:

Error 1
ERROR: File not found: 2\Symbian\9.2\S60_3rd_FP1\epoc32\release\WINSCW\UDEB\Z\resource\apps\MyProject.mif

Note: I have defined the following file MyProject.mifdef along with other project files, it contains the following line:
c32,8|gfx\qgn_menu_MyProject.svg

Error 2
make[1]: *** No rule to make target `\Symbian\9.2\S60_3rd_FP1\EPOC32\RELEASE\WINSCW\UDEB\inetproutil.lib', needed by `\Symbian\9.2\S60_3rd_FP1\EPOC32\RELEASE\WINSCW\UDEB\MyProject.exe'. Stop.

Note: the inetproutil library is already included in the mmp file

When I build my application using 3rd I get this error
Error 1
ERROR: File not found \Symbian\9.1\S60_3rd\epoc32\release\WINSCW\UDEB\Z\resource\apps\GPSMonitor.bmp

In addition to that I get the same second error

How to tackle and resolve these problems? (I have searched a lot for solutions and until now I was not able to fix it!)

FYI:
Carbide v1.2 & v1.3
SDKs 3rd, 3rd_MR, 3rd_FP1

[wizard_hu_]

Some things seem to be typo-issues:
- the "2" in 2\Symbian\... looks suspicious, since that "2" does not appear in any other message
- inetproutil.lib really does not exist, it should be inetprotutil
- the 3rd error is probably correct too, you can simply visit that directory, and there are high chances that it does not have GPSMonitor.bmp - though I have never seen a build process complaining about missing image files from a target folder, your project must be a strange one.

[sriky27]

Hi,
If your problem is not resolved yet could you share your .mmp and .mk to better understand your situation and pin point the problem.

Thanks and Regards,
Sriky

[mockba]

I have removed the invalid inetproutil library entry from the mmp file it removed the second error but still when I'm building my application I receive error 1

When building using sdk 3rdEd -> bmp file not found !!
When building using sdk 3rdEd_FP1 -> mif file not found !!

This is the content of the mmp file

TARGET            MyProject.exe
TARGETTYPE        exe
UID		  0x0     0x20010FEC 

SOURCEPATH        ..\src
SOURCE            MyProject.cpp
SOURCE            MyProjectApplication.cpp
SOURCE            MyProjectAppUi.cpp
SOURCE            MyProjectDocument.cpp

SOURCEPATH        ..\data
START RESOURCE    MyProject.rss
HEADER
TARGETPATH resource\apps
END //RESOURCE

START RESOURCE    MyProject_reg.rss
TARGETPATH 	      \private\10003a3f\apps
END //RESOURCE

START RESOURCE    ..\data\20010FEC.rss
TARGETPATH        \private\101f875a\import
HEADER
END

USERINCLUDE       ..\inc

SYSTEMINCLUDE     \epoc32\include \epoc32\include\variant \epoc32\include\oem \epoc32\include\ecom ..

LIBRARY           euser.lib
LIBRARY			  ws32.lib
LIBRARY			  apgrfx.lib
LIBRARY			  ecom.lib
LIBRARY			  commdb.lib
LIBRARY			  http.lib
LIBRARY			  satinfo.lib
LIBRARY			  apparc.lib
LIBRARY			  cone.lib
LIBRARY			  eikcore.lib
LIBRARY			  avkon.lib
LIBRARY			  commonengine.lib
LiBRARY			  etel3rdparty.lib
LIBRARY			  efsrv.lib
LIBRARY			  estor.lib
LIBRARY			  aknskinsrv.lib
LIBRARY			  aknskins.lib
LIBRARY			  lbs.lib
LIBRARY			  bafl.lib
LIBRARY			  eikcoctl.lib
LIBRARY			  eikdlg.lib
LIBRARY			  eikctl.lib
LIBRARY			  fbscli.lib
LIBRARY			  aknicon.lib
LIBRARY			  aknnotify.lib
LIBRARY			  etext.lib
LIBRARY			  gdi.lib
LIBRARY			  egul.lib
LIBRARY			  edbms.lib
LIBRARY			  insock.lib
LIBRARY			  inetproutil.lib
LIBRARY			  http.lib
LIBRARY			  esock.lib commonui.lib apmime.lib sysutil.lib hlplch.lib inetprotutil.lib

LANG SC 01
EPOCSTACKSIZE 	  0x14000
EPOCHEAPSIZE      0x5000 0x800000
VENDORID	  	  0
SECUREID	      0x20010FEC
CAPABILITY	  	  LOCATION NETWORKSERVICES READUSERDATA
// End of File
START BITMAP MyProject_mbm.mbm
	HEADER
	SOURCEPATH ..\Bitmaps
	SOURCE c24 MainScreen.bmp
	SOURCE 8 MainScreenMask.bmp
	SOURCE c24 GPSInactive.bmp
	SOURCE 8 GPSInactiveMask.bmp
	SOURCE c24 GPSLookup.bmp
	SOURCE 8 GPSLookupMask.bmp
	SOURCE c24 SpeedUp.bmp
	SOURCE 8 SpeedUpMask.bmp
	SOURCE c24 SpeedDown.bmp
	SOURCE 8 SpeedDownMask.bmp
	SOURCE c24 NorthNeedle.bmp
	SOURCE 8 NorthNeedleMask.bmp
	SOURCE c24 SouthNeedle.bmp
	SOURCE 8 SouthNeedleMask.bmp
	SOURCE c24 EastNeedle.bmp
	SOURCE 8 EastNeedleMask.bmp
	SOURCE c24 WestNeedle.bmp
	SOURCE 8 WestNeedleMask.bmp
	SOURCE c24 SouthWestNeedle.bmp
	SOURCE 8 SouthWestNeedleMask.bmp
	SOURCE c24 SouthEastNeedle.bmp
	SOURCE 8 SouthEastNeedleMask.bmp
	SOURCE c24 NorthWestNeedle.bmp
	SOURCE 8 NorthWestNeedleMask.bmp
	SOURCE c24 NorthEastNeedle.bmp
	SOURCE 8 NorthEastNeedleMask.bmp
	SOURCE c24 GPSActive.bmp
	SOURCE 8 GPSActiveMask.bmp
	TARGETPATH resource\apps
END
START BITMAP MyProject_352x416.mbm
	HEADER
	SOURCEPATH ..\Bitmaps(352x416)
	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp EastNeedle.bmp EastNeedleMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp
	TARGETPATH resource\apps
END
START BITMAP MyProject_320x240_mbm.mbm
	HEADER
	SOURCEPATH ..\Bitmaps(320x240)
	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp EastNeedle.bmp EastNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp GPSLookup.bmp GPSLookupMask.bmp GPSActive.bmp GPSActiveMask.bmp GPSInactive.bmp GPSInactiveMask.bmp SpeedDown.bmp SpeedDownMask.bmp SpeedUp.bmp SpeedUpMask.bmp
	TARGETPATH resource\apps
END
START BITMAP MyProject_240x320_mbm.mbm
	HEADER
	SOURCEPATH ..\Bitmaps(240x320)
	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp MainScreen2.bmp MainScreenMask2.bmp GPSLookup.bmp GPSLookupMask.bmp GPSInactive.bmp GPSInactiveMask.bmp GPSActive.bmp GPSActiveMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp EastNeedle.bmp EastNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp SpeedDown.bmp SpeedDownMask.bmp SpeedUp.bmp SpeedUpMask.bmp
	TARGETPATH resource\apps
END
SOURCEPATH ..\src
SOURCE TimeOutTimer.cpp SettingsDialog.cpp Response.cpp NetworkCellMonitor.cpp IMEI.cpp MyProjectView.cpp MyProjectUtils.cpp MyProjectSettingsItemList.cpp MyProjectSettingsInfo.cpp MyProjectPositionRequestor.cpp MyProjectLogEngine.cpp MyProjectEngine.cpp MyProjectDBMSEngine.cpp MyProjectContainer.cpp MyProjectActivation.cpp GPSGuiControl.cpp GPRSHttpManagerEngine.cpp GPRSController.cpp GPRSConnOpener.cpp CustomEdwin.cpp
START BITMAP BMP.mbm
	TARGETPATH resource\apps
	HEADER
	SOURCEPATH ..\BitmapImages
	SOURCE c24,1 MainScreen176x208.bmp MainScreenMask176x208.bmp MainScreen240x320.bmp MainScreenMask240x320.bmp MainScreen320x240.bmp MainScreenMask320x240.bmp GPSInactive176x208.bmp GPSInactiveMask176x208.bmp GPSInactive240x320.bmp GPSInactiveMask240x320.bmp GPSLookup176x208.bmp GPSLookupMask176x208.bmp GPSLookup240x320.bmp GPSLookupMask240x320.bmp GPSActive176x208.bmp GPSActiveMask176x208.bmp GPSActive240x320.bmp GPSActiveMask240x320.bmp NorthNeedle176x208.bmp NorthNeedleMask176x208.bmp NorthNeedle240x320.bmp NorthNeedleMask240x320.bmp SouthNeedle176x208.bmp SouthNeedleMask176x208.bmp SouthNeedle240x320.bmp SouthNeedleMask240x320.bmp WestNeedle176x208.bmp WestNeedleMask176x208.bmp WestNeedle240x320.bmp WestNeedleMask240x320.bmp EastNeedle176x208.bmp EastNeedleMask176x208.bmp EastNeedle240x320.bmp EastNeedleMask240x320.bmp NorthWestNeedle176x208.bmp NorthWestNeedleMask176x208.bmp NorthWestNeedle240x320.bmp NorthWestNeedleMask240x320.bmp SouthWestNeedle176x208.bmp SouthWestNeedleMask176x208.bmp SouthWestNeedle240x320.bmp SouthWestNeedleMask240x320.bmp SouthEastNeedle176x208.bmp SouthEastNeedleMask176x208.bmp SouthEastNeedle240x320.bmp SouthEastNeedleMask240x320.bmp NorthEastNeedle176x208.bmp NorthEastNeedleMask176x208.bmp NorthEastNeedle240x320.bmp NorthEastNeedleMask240x320.bmp SpeedDown176x208.bmp SpeedDownMask176x208.bmp SpeedDown240x320.bmp SpeedDownMask240x320.bmp SpeedUp176x208.bmp SpeedUpMask176x208.bmp SpeedUp240x320.bmp SpeedUpMask240x320.bmp
END

[mockba]

By the way regarding the
ERROR: File not found: 2\Symbian\9.2\S60_3rd_FP1\epoc32\release\WINSCW\UDEB\Z\resource\apps\MyProject.mif

I have seen a similar error in the following post also mifconv.exe fails with option /X

Here is the content of the mk file:

ifeq (WINS,$(findstring WINS, $(PLATFORM)))
ZDIR=$(EPOCROOT)epoc32\release\$(PLATFORM)\$(CFG)\Z
else
ZDIR=$(EPOCROOT)epoc32\data\z
endif

TARGETDIR=$(ZDIR)\resource\apps
ICONTARGETFILENAME=$(TARGETDIR)\MyProject.mif

ICONDIR=..\gfx

do_nothing :
	@rem do_nothing

MAKMAKE : do_nothing

BLD : do_nothing

CLEAN : do_nothing

LIB : do_nothing

CLEANLIB : do_nothing

RESOURCE :	
	mifconv /X $(ICONTARGETFILENAME) \
		/c32 $(ICONDIR)\qgn_menu_MyProject.svg
		
	mifconv $(ICONTARGETFILENAME)  \
		 /H$(EPOCROOT)epoc32\include\MyProject.mbg  \
		 /c32,8 $(ICONDIR)\qgn_menu_MyProject.svg
FREEZE : do_nothing

SAVESPACE : do_nothing

RELEASABLES :
	@echo $(ICONTARGETFILENAME) 

FINAL : do_nothing

[mockba]

I have detected that there was some sort of duplicate creation of mif files so I have removed the first two commands, unfortunatly this was automatically generated by carbide v1.2&v1.3 update tools where it inserted the last 3 lines but it failed to remove the original 2 lines

mifconv /X $(ICONTARGETFILENAME) \
	/c32 $(ICONDIR)\qgn_menu_MyProject.svg
		
mifconv $(ICONTARGETFILENAME)  \
	 /H$(EPOCROOT)epoc32\include\MyProject.mbg  \
	 /c32,8 $(ICONDIR)\qgn_menu_MyProject.svg

Now I'm able to build the application and run it using 3rd_FP1

On the other hand, when I build using 3rd I get build complete but when I try to run the emulator I get the error Launching "program file doesn't exist"
This is a copy of the detailed message Program file does not exist
"C:\Symbian\9.2\S60_3rd_FP1\Epoc32\release\WINSCW\UDEB\GPSMonitor.exe not found"
I really don't understand why carbide is trying to locate the project exe in the 3rd_FP1 folder while I was building for the 3rd edition. I perform the switch between the sdks using the "Active Build Configuration" Options menu !!!

NOTE: Before I issue any build commands I perform a cleaning operation on the project

[wizard_hu_]

Check the "Run configuration", so what file it tries to execute, and also check if your .exe is really created in epoc32\release\winscw\udeb.

[mockba]

Thanks alot managed to fix my problems, had to create a new run launch configuration for the 3rd_Ed build