Connecting to Asterisk server

[vidhu.0007]

hi all....

I m trying to register my S60 emulator to Asterisk SIP server by creating a default profile in SIP Settings.It shows Not Registered. The settings are as follows:-

Profile Name: Profile1
Service Profile: IETF
Default access point: Winsock
Public UserName: sip:3000@127.0.0.1:5060
Use compression: no
Registration: Always on
use securtiy: no

Proxy server:
Proxy server Address: 127.0.0.1
Realm:asterisk
username:3000
password:none
Allow loose routing:Yes
Transport Type:UDP
port:5060

Registrar server:
Registrar server Address: 127.0.0.1
Realm:none
username:3000
password:none
Transport Type:UDP
port:5060


One thing to be noted is that when I start Asterisk server,and check its ip and port by typing netstat -a in cmd it shows:
0.0.0.0:5060

Also after enabling the sip debug in asterisk server, no request packet is received from the s60 emulator.

Thanks in Advance...

[wizard_hu_]

Make sure that network access actually works in the emulator (test it with the built-in browser for example).

[vidhu.0007]

Thanx a lot..

i tried 2 test the network access of the emulator by using the built in browser. I typed the web address as www.google.com. and the web page was displayed successfully.. i again tried to connect to Asterisk server using the same settings but it is still NOt registered.

Plz help me on that..

[vidhu.0007]

Thanx for your help..

my problem has been solved. i am able to register the emulator with asterisk server.