Undefined symbol: 'TSmsAddr

[rohanwaugh]

Hi all,

in my application i require smsu.lib and smsuaddr.h files.I have copied these files from series 60 Plug in.

1.I have copied smsu.lib file at \Epoc32\release\armv5\lib location and also at \Epoc32\release\winscw\udeb location

2.And i have copied smsuaddr.h file at \Epoc32\include location.

After doing above two things also i am getting error on the console that -

Undefined symbol: 'TSmsAddr::TSmsAddr(void)(??0TSmsAddr@@QAE@XZ)'

What may be the reason of error?

Help Me..

Rohanwaugh

[wizard_hu_]

1.I have copied smsu.lib file at \Epoc32\release\armv5\lib location and also at \Epoc32\release\winscw\udeb location

Guess why the original file resides in SMSUtilities\epoc32\release\armv5\lib? It will not work for WINSCW.

[rohanwaugh]

hi ,


Sorry but i didn't understand what your saying..what wrong i did??
What should be done??

rohanwaugh

[wizard_hu_]

Most API-s from the plugin pack come with support for the target devices only. You can not use ARM libraries for building code for the PC-based emulator, thus it is not possible to use TSmsAddr in the emulator (the mangled name ??0TSmsAddr@@QAE@XZ in the error message shows that you are building for the emulator - even if you are doing that accidentally).
You should test your code in the target device.

[rohanwaugh]

hi

Thanks.Now i got my mistake.Now i build application for phone release directly and sis file got generated without any problem.Now i will check the application by deploying on device directly..

Rohanwaugh

[Kranti]

Hi all,

I wrote following code >> to bind the smsAddr to socket

TUint KEchoPort= 5000;
TSmsAddr smsaddr;

smsaddr.SetSmsAddrFamily(ESmsAddrSendOnly);
smsaddr.SetPort(KEchoPort);
myLogFile->writeLog(_L("SetPort"));

User::LeaveIfError(socket.Bind(smsaddr));
myLogFile->writeLog(_L("socket.Bind(smsaddr)"));

But I get log upto "SetPort"......
There is some probelm regarding socket.Bind(smsaddr)

Can anybody tell me ... where I m getting wrong?

Thanks and Regards,
Kranti

[wizard_hu_]

Either enable panic codes http://wiki.forum.nokia.com/index.ph...ded_panic_code, or simply log the return code of Bind prior to LeaveIfError.
Personally I do not know what ESmsAddrSendOnly could be, but if it is something special for sending, it does not really make sense Bind-ing to it (since Bind is about receiving data).

[rohanwaugh]

Hi,

Basically Kranti and i are working on same project.So my sis file is getting generated for phone release.Bcos as stated by wizard_hu we r using API's from Series 60 SDK Plug In so for emulator debugging it is giving errors on console.

So we directly build our application for phone release.It worked fine.But as stated by Kranti in the previous thread we r getting error..So pls help us for Binding Socket..

Thanks.

Rohanwaugh

[Kranti]

Hi wizard_hu_,

1. I am getting error code = -46 for
(socket.Bind(smsaddr)

2. Enum TSmsAddrFamily
Description:
SMS address family for a socket.

ESmsAddrSendOnly >> Only for sending, no reception.
.
.
.
ESmsAddrApplication8BitPort >> For sock port identification.

ESmsAddrApplication16BitPort >> For sock port identification.

So I use "ESmsAddrSendOnly "


Now I will try for remaining 2 related SMS address family for a socket.

What could be the reason for binding error?
I also searching for that ..... if u know... pls help....!

Thanks and Regards,
Kranti

[Kranti]

Hi ,

http://www.newlc.com/article.php3?id_article=117

KErrPermissionDenied -46

What could be the reason for this?
Any signing related issue?

Thanks and Regards,
Kranti

[wizard_hu_]

Negative numbers: http://wiki.forum.nokia.com/index.php/Error_codes
You will probably need at least the same capabilities that are necessary for MTM-based SMS communication. But it might be necessary to have more.

[Kranti]

Hi wizard_hu_,

While signing .sis file I selected ALL capabilities.
U mean that will not help to solve capability issue?
Regarding "KErrPermissionDenied".

Thanks and Regards,
Kranti

[wizard_hu_]

I simply do not know what ESmsAddrSendOnly is. However if it is about sending, I can not see the reason for Bind.

[Kranti]

Hi wizard_hu_,

I want to send sms to perticular port....
That's why I am using Bind...

Is anything wrong in that?

Thanks and Regards,
Kranti

[wizard_hu_]

Is anything wrong in that?

I simply do not know. I also see the SMS Utilities API example in the Wiki, but I have never tried it.

Actually you have been participating in an other thread about sending SMS to port, http://discussion.forum.nokia.com/fo...d.php?t=147817
You may try if the PDU-way works.