sdk installation?

[McLightning]

hi everybody.
im new to symbian c++ programming yesterday i installed active perl,carbide.c++ and s60v3 MR sdk.
i installed all of them to same hard drive.
s60v3 mr sdk is on "c:\symbian\dev\s60"
i set carbide.c++ workspace directory to "c:\symbian\dev"

but afterwards
it seems sdk is not installed correctly

errors are below that i'm getting when i try to run an app. design

BLDMAKE ERROR: Platform WıNSCW not supported by "\Symbian\dev\S60_3rd_MR_2\ss\group\BLD.INF"
bldmake returned with exit value = 1

http://img132.imageshack.us/img132/9083/adszuv9.jpg
in the image above there is a "s60 3rd Edition section" but in my carbide there is written only "S60" no "3rd"

what is wrong with my carbide.c++??

please help me
sorry for my english

[stenlik]

Hi,

very similar problem was discussed on the DiBo and it was succesfully solved:
http://discussion.forum.nokia.com/fo...=139692&page=2
Read it carefully - there are few good points in this thread.

BR
STeN

[McLightning]

it's not looking like the solution of my problem.:(

[McLightning]

when i run this command from the command prompt it says:
can not set the device "s60_3rd_fp2_sdk:com.nokia.s60" as the default, device not known

[kamaljaiswal]

in which sdk installed drive and workspace created should be in the same drive .
Set the device -setdefault @s60_3rd_fp2_sdk:com.nokia.s60. This problem is related to System path variable of EPOCROOT.

[McLightning]

they are already on same drive
s60v3_mr_sdk is on "c:\symbian\dev\"
i set carbide.c++ workspace directory to "c:\symbian\dev"

[ltomuta]

BLDMAKE ERROR: Platform WıNSCW not supported by "\Symbian\dev\S60_3rd_MR_2\ss\group\BLD.INF"
bldmake returned with exit value = 1

it's not looking like the solution of my problem.:(

I think you should have another look. The error message signals a non existing "WıNSCW" platform and that is right, the name of the platform is "WINSCW". It must be your particular language settings in Windows that are causing your problem

[wizard_hu_]

Indeed, the esoteric WıNSCW issue (if you search for it using the link below, there are 5 threads about it - including this one).
In fact it would be nice to know if that "ı" character is something what you have typed yourself, or the code generator (of Carbide) produces this letter under certain language settings.