[moved] Unsupported platform GCCE specified

[jvinjam]

Hi,

I'm trying to build sample application from
"C:\Symbian\9.1\S60_3rd\Examples\AppProts\exampleclient".

It builds fine on emulator.

I'm getting the following build error when I try to build for device.

\Symbian\9.1\S60_3rd\Examples\AppProts\exampleclient\BLD.INF FATAL ERROR(S):
\Symbian\9.1\S60_3rd\Examples\AppProts\exampleclient\BLD.INF(7) : Unsupported platform GCCE specified

Added the line
PRJ_PLATFORMS
GCCE WINSCW
to the .mmp file. Still getting the error.

Could someone tell me how to fix this? Or my SDK installation is corrupted?

Thanks,
jvin

[ltomuta]

You should use the S60 3rd Edition MR (Maintenance Release). Also, make sure to install the GCCE compiler, the SDK installation prompts you to do this but you can also do it at a later time.

See yesterday's useful link in my signature for a guide on how to test the installed tools.

Also, you may want to try first the S60 examples (\S60Ex) and only when you are convinced that you master the SDK you can try the less user friendly Symbian examples from \Examples

Finally, this is not an networking issue, it's an SDK and Tools issue and should be posted in the appropriate forum. (I'm moving the thread there)

[jvinjam]

Hi,

Are you talking about this link?
http://wiki.forum.nokia.com/index.ph..._Symbian_OS%3F

I checked everything. Only difference is I'm using S60_3rd, not S60_3rd MR. I'm going to install that and try.

I had another issue in networking. I was checking under Networking section.
Forgot to change the forum and posted the new thread. Sorry about that.

Thanks,
jvin

[ltomuta]

No problem really, is just that posting in the relevant forum helps you find the answer faster and also helps other find a solution later.

So you have the GCCE compiler installed and the proper path set yet you are still getting that error. Interesting ...

[ltomuta]

...
Added the line
PRJ_PLATFORMS
GCCE WINSCW
to the .mmp file. ...

I hope you have the above statement in the bld.inf file and not in the *.mmp, as in fact the error message also suggests. Moving it to the MMP files is not a valid solution

[jvinjam]

Yes, that's right. In bld.inf file.
Sorry. :-)

[wizard_hu_]

Missing CSL installation usually results in other kind of problems (compiler turns out to be missing when the toolchain tries to call it). "Unsupported platform GCCE" rather suggests that you are using a 2nd edition SDK for some reason.

[jvinjam]

I installed S60 3rd Edition MR. That fixed the problem.

Thanks,
jvin

[prathapdk]

I had the same problem. But I solved it by setting the EPOCROOT properly.

The EPOCROOT was earlier been set to \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32. With this path the build command "make debug-winscw" use to give error message "Unsupported platform GCCE specified". When I changed the EPOCROOT to \S60\devices\S60_3rd_FP2_SDK_v1.1\ (without specifying epoc32) then the problem got solved :)