Disabling the alerts in handsets

[nagesh.chetana]

Hi,

I have done a Receive message application,i'm sending a message to the specific port,once the message has been sent my application starts to recv the message and it gives me Alert as "Allow application to read the user data" many times, currently it asks more than 5 times.

Is there any way so that i get this alert only once.
Please reply ASAP.


Tks,

[bhanuchandar.k]

Hi nagesh.chetana,
Are Is your application is using any Jsr75 API's ?
Is your application is signed ?
if your application is signed you have to change the application access settings
juts go the application manager and then select the application then suite setting and then check the option out there..set the desired one as ask once.

[nagesh.chetana]

Hi nagesh.chetana,
Are Is your application is using any Jsr75 API's ?
Is your application is signed ?
if your application is signed you have to change the application access settings
juts go the application manager and then select the application then suite setting and then check the option out there..set the desired one as ask once.

Hi,

Yes i'm using the JSR 75 API's and i havent signed the application.
The application is working fine, if i have not signed the application.
Isnt there any other way?
Can u please tell me how to sign the application

Please excuse me if it is a silly question and has been answered already.


Tks,

[bhanuchandar.k]

If you have not signed your application then you will get this prompts there is no way to get out of the prompts if it is not signed. If you have signed then change the application access setting to ask once.

For signing help
http://www.spindriftpages.net/blog/d...orial-revised/
http://developers.sun.com/mobility/w.../wtk-sign.html
http://multivac.fatburen.org/localdo.../security.html
http://blog.javia.org/midlet-signing/
http://www.forum.nokia.com/info/sw.n..._0_en.pdf.html

[nagesh.chetana]

Thanks for the links.

One more question :
--While recvng some text message like "Hi hello" i get this alert "Allow application to read user data" 3 times.
--While recvng some text message like "hi hello 9821345678(some mobile numbr)", in this case i get the alert 6 times.


I'm still in a doubt whether its a problem in the code or is it the thing which can only be solved by signing the application.


Thanks,

[jitu_goldie]

Hi nagesh,
I dont found so much alerts for sending and receiving sms. i have tried it and it will ask just once. Might be there is some problem with ur code. Please check it out.

thanks,
jitu_goldie..

[raj_J2ME]

Thanks for the links.

One more question :
--While recvng some text message like "Hi hello" i get this alert "Allow application to read user data" 3 times.
--While recvng some text message like "hi hello 9821345678(some mobile numbr)", in this case i get the alert 6 times.


I'm still in a doubt whether its a problem in the code or is it the thing which can only be solved by signing the application.




Thanks,

Hi Nagesh,
Well the code for the sending the sms, ask you once that for the permission.and I guess that on receiving the sms it will not ask for the permission.

Can you make sure that you are not sending the sms on a thread..Yeah I mean in a loop.please do check this and make sure...

please do not get confuse,you must be using the thread for sending..but it must not be in a loop...send() methods must be call once.

[nagesh.chetana]

Hi Nagesh,
Well the code for the sending the sms, ask you once that for the permission.and I guess that on receiving the sms it will not ask for the permission.

Can you make sure that you are not sending the sms on a thread..Yeah I mean in a loop.please do check this and make sure...

please do not get confuse,you must be using the thread for sending..but it must not be in a loop...send() methods must be call once.

Hi Raj,

The problem is not in sending, while sending it asks the permission only once.

But the problem is while receiving the message, im reading the pim contacts to check whether the number which was sent in the message is present in my phone contacts, And at this time im getting so many alerts.(currently giving 6 alerts.)

I'm not able to figure out which part of that code is giving this problem.

(I also made a separate program of only reading PIM contacts from the memory, its giving me 3 alerts, irrespective of how many contacts are in there in my phone book).

Please help me in solving this issue.


Tks,

[raj_J2ME]

Hi Raj,

The problem is not in sending, while sending it asks the permission only once.

But the problem is while receiving the message, im reading the pim contacts to check whether the number which was sent in the message is present in my phone contacts, And at this time im getting so many alerts.(currently giving 6 alerts.)

I'm not able to figure out which part of that code is giving this problem.

(I also made a separate program of only reading PIM contacts from the memory, its giving me 3 alerts, irrespective of how many contacts are in there in my phone book).

Please help me in solving this issue.


Tks,

HI,
You must be reading the contacts in a loop,how many contacts are there in the list.I guess there might be 3 or 6.correct me if I am wrong.
Are you sure that these alerts are only shown while reading the contacts only.Make sure that there is nothing running in the code like file connection etc apart from these reading the contacts.

[mikemoore]

One more question :
--While recvng some text message like "Hi hello" i get this alert "Allow application to read user data" 3 times.
--While recvng some text message like "hi hello 9821345678(some mobile numbr)", in this case i get the alert 6 times.

I'm still in a doubt whether its a problem in the code or is it the thing which can only be solved by signing the application.

You will need to sign your application to change the permission to "Always Allow" from "Ask Every Time" for the following subsystems:

Call Control
Messaging (e.g. SMS)
Read User Data
Edit User Data

How many alerts you get with an unsigned application depends on how you have written your code. If you post the relevant code we can take a look at it.

- Mike
NAVTEQ Network for Developers
The community for developing innovative location-based applications
http://NN4D.com

[nagesh.chetana]

HI,
You must be reading the contacts in a loop,how many contacts are there in the list.I guess there might be 3 or 6.correct me if I am wrong.
Are you sure that these alerts are only shown while reading the contacts only.Make sure that there is nothing running in the code like file connection etc apart from these reading the contacts.

Hi Raj,

Now i have 6 contacts in my phone book, and yes im using a for loop.

Here is the code for that :-

public void readContacts()
{
String[] lists = pim.listPIMLists(pim.CONTACT_LIST);
for (int i = 0; i < lists.length; i++)
{
try{
pimlist = pim.openPIMList(pim.CONTACT_LIST,pim.READ_ONLY);
}catch(Exception e){}

try{
enumeration = pimlist.items();
}catch(Exception e){}

while (enumeration.hasMoreElements()){
contact =(Contact)enumeration.nextElement();
try{
if(pimlist.isSupportedField(Contact.FORMATTED_NAME)&& (contact.countValues(Contact.FORMATTED_NAME) >0))
{
contactName += contact.getString(Contact.FORMATTED_NAME,0) +"\n";;
System.out.println("Contact name:"+contactName);
}
}catch( Exception e){}

int phoneNos = contact.countValues(Contact.TEL);
try{

if(pimlist.isSupportedField(Contact.TEL) &&(phoneNos > 0))
{
contactNo += contact.getString(contact.TEL,0) +"\n";
System.out.println("contact No :"+contactNo);
}
}
catch( Exception e){}

}

name = new StringItem("Name",contactName);
telno = new StringItem("No",contactNo);
append(name);
append(telno);

}
}


Tks,

[mikemoore]

contact =(Contact)enumeration.nextElement();

You are reading user data at this point. Every time this line is executed by an unsigned application the user will be asked to confirm the access.

- Mike
NAVTEQ Network for Developers
The community for developing innovative location-based applications
http://NN4D.com

[nagesh.chetana]

You are reading user data at this point. Every time this line is executed by an unsigned application the user will be asked to confirm the access.

- Mike
NAVTEQ Network for Developers
The community for developing innovative location-based applications
http://NN4D.com

Thanks Mike,

Is there any solution for this.

What change i should make to that line of code ..so that it doesnt ask me the permission.

[raj_J2ME]

Hi Nagesh,
Device will ask for the permission as many time as many times the user data is accessed...there is not workaround to get rid of this.
There is nothing to be done.you have a hard luck.

[mikemoore]

What change i should make to that line of code ..so that it doesnt ask me the permission.

There is no change that you can make to your code that would mean the user is never asked for permission. The only way to do that is to purchase a certificate and sign the application - then the user will be asked just once, during the installation process.

- Mike
NAVTEQ Network for Developers
The community for developing innovative location-based applications
http://NN4D.com