Python runtime SIS without PIPS SIS for 5800 XM

[mahesh.sayibabu]

Hi All,

A new Python runtime SIS is uploaded on maemo garage. This SIS does not have any OpenC PIPS SIS embedded in it. This file is released so that users can install PyS60 1.9.3 runtime on devices (mainly 5800 XM) that have problems ("Component is built-in") in installing PIPS SIS, previously embedded in the runtime SIS.

This will work with PIPS 1.4 libraries, but socket module and fixes to few bugs that depend on PIPS 1.5Beta libraries will not be available. The issue with PIPS 1.5Beta installation doesn't seem to be on all devices and OpenC team is investigating the cause for the same. We shall keep you updated on this.

Thanks

[croozeus]

Great! Now no longer hard reset needed!

Thanx,

//Croozeus

[lkz633]

Will there also be new packages for the emulator? Neither the 3rd Edition package nor the 3rd Edition FP1 work. Maybe due to references to PIPS 1.5 beta, which does not exist for the emulator? 1.9.2 worked fine on Emulator.

Regards
Max

[pandaxiaoxi]

hi,when i install Python runtime SIS 1.9.3 for 3rd ED FP2,my phone N78 also has the same problems(Components is built in)in installing PIPS SIS, previously embedded in the runtime SIS.

please check the problem in my N78 that is buyed yesterday.my language set code is 015,software version is 12.046.

[mahesh.sayibabu]

Will there also be new packages for the emulator? Neither the 3rd Edition package nor the 3rd Edition FP1 work. Maybe due to references to PIPS 1.5 beta, which does not exist for the emulator? 1.9.2 worked fine on Emulator.

Regards
Max

OpenC 1.5 beta is planned to be released soon and the OpenC packages for emulator will be part of this release.

[mahesh.sayibabu]

hi,when i install Python runtime SIS 1.9.3 for 3rd ED FP2,my phone N78 also has the same problems(Components is built in)in installing PIPS SIS, previously embedded in the runtime SIS.

please check the problem in my N78 that is buyed yesterday.my language set code is 015,software version is 12.046.

If i understand the problem correctly, you tried to install Python runtime SIS 1.9.3 sis on a brand new N78 and you got "Component built in" error? Before trying to install this, did you install 1.4 OpenC SIS on this phone ? or did you do a firmware update ?

[pandaxiaoxi]

If i understand the problem correctly, you tried to install Python runtime SIS 1.9.3 sis on a brand new N78 and you got "Component built in" error? Before trying to install this, did you install 1.4 OpenC SIS on this phone ? or did you do a firmware update ?

yes,you are right.
but i don't install 1.4 OpenC SIS anywhere.i also don't do a firmware update.
please tell me which version to have OpenC 1.4 inside.

[siddiquemerchant]

Hi,

When I try to install Python runtime 1.9.3 in nokia 5800, it gives error message "Expired Certificate" and quits the installtion.

I tried 1.9.0, 1.9.1 and 1.9.2 also but same problem.

Pls help

Siddique

[Nokia Ron]

Hi,

When I try to install Python runtime 1.9.3 in nokia 5800, it gives error message "Expired Certificate" and quits the installtion.

I tried 1.9.0, 1.9.1 and 1.9.2 also but same problem.

Pls help

Siddique

the answer is in post 22 of this sticky thread

http://discussion.forum.nokia.com/fo...d.php?t=163019

Ron

[siddiquemerchant]

Dear Mr. Ron
Thanks for the quick reply.
I checked the given link. It discusses about problem "Component is built-in"
but I am getting a different problem. while installing "python for S60 1.9.3" sis file, it gives message "Expired Certificate" which I could not find anywhere in the forum.

I have software version 11.0.009 and laguage set 11 installed in my nokia 5800.
I tried to update the firmware but it says no update is available. probably update is not available in our region (United Arab Emirates)

is it firmware version problem or am I missing doing something wrong.

I already installed Pips 1.4 and Pythonscriptshell and all the dependencies, but python run time is not installing.

pls help
Regards,

[vcorning]

Sorry for being slow, but what is the exact process I go through to install python on my new 5800? Should I update the firmware first? I use the pre-built .sis file and what else do I need? etc... I installed python 5 months ago on an e51, but it looks like things have changed a bit. At that time, I just needed to copy 2 .sis files to the correct location...

Kind regards,

Vince

[vcorning]

Hello All,

I used bluetooth to transfer:

First Python runtime SIS without PIPS for 5800XM (Installed Fine)
Then PyScriptShell_v1.4.5.S60v5

and I get UNABLE TO INSTALL CONSTRAINED BY CERTIFICATE

Any Ideas?

[ashwinurao]

Then PyScriptShell_v1.4.5.S60v5

Any Ideas?

You installed the wrong ScriptShell. You need to install the ScriptShell present in Maemo Garage which is v1.9.3

[mahesh.sayibabu]

yes,you are right.
but i don't install 1.4 OpenC SIS anywhere.i also don't do a firmware update.
please tell me which version to have OpenC 1.4 inside.

Looks like this is because of the same issue in PIPS sis that is causing installation problem on certain 5800 XM phones. We shall check this, and get back to you.