install

[zohirey2]

i have make sis and sisx
what s the next step to install on handset
as i tried but failed

[ltomuta]

Failed? How? On which device? How does your *.pkg file looks like? Have you installed the *.sis or the *.sisx file? Why?

[savaj]

i have make sis and sisx
what s the next step to install on handset
as i tried but failed

What error you are getting during instalation?? have you signed application with valid certificate?

[zohirey2]

no i have not signed it
i want to know a simple method for signing
as online is very boring
and they didn't replay on me!

is there another simple method?
all what i want is one device i mean not a commercial product


if any have please tell me
or can i send him my sis and signed it for me?!

[kiran10182]

Yes, there is one very simple method. Let Carbide.c++ IDE handle all the pains on your behalf. If it is not configured somehow then see this picture in this article: http://wiki.forum.nokia.com/index.ph...gn_Certificate

[ltomuta]

If Carbide.c++ generates a *.sisx file then that file is signed. Most likely self-signed.

You seem to have a very poor understanding of what signing means and what its role is. Please read the relevant documentation.

As for "online is very boring and they didn't replay on me!" ... who should reply to you and what should they reply? Maybe a joke, to make the process less boring.

The type of signing required depends on the capabilities you use. See Platform Security and Symbian Signed. Which capabilities do you use?
It could be very well that self-signing is enough but you have some other defect in the sis file. What error message have you seen when installing the application?

[zohirey2]

sorry for mis-understand

i go to www.symbian.signed.com
and enter IMSI
and sis
so i wait for a replay


i will tell you
when i make sis and naturally sisx using carbide
i couldnot install it on device
as the message tell me that my app. didnot get the required ability

thet is all of my problem!

i am sorry as i am not an expert but i know that you can help persons like me

[ltomuta]

Please use your phone in English language and take note of the exact error message rather that trying to translate it. If you search then the forum and the wiki for that error message and you will find an explanation of what is causing it.

You seem to be using capabilities which cannot be granted to self-signed applications. Since you do not have an offline developer certificate there is nothing you can do about signing the sis file so you should rather configure Carbide.c++ not to waste time signing the SIS anymore.

Please verify your capability requirements. Are they compatible with Open Signed Online? If so, submit the sis file for signing and wait. If the sis file is not signed within 5 minutes then wait no more. Go back to Symbian Signed, look at the bottom of the page for a link to "Symbian Signed Support" and post your comments on that forum for the Symbian Signed to know about your problem and guide you.

[zohirey2]

my application
contain
ReadUserData
so i need to sign it
self signed cant be accepted

i tried to use symbiansigned
but it is required impossible things
like un public email

is there another simple method
i am get unhappy and upset

[savaj]

my application
contain
ReadUserData
so i need to sign it
self signed cant be accepted

i tried to use symbiansigned
but it is required impossible things
like un public email

is there another simple method
i am get unhappy and upset

The OpenSigned Online is easy than getting developer certificate. There is no other simple method to get sign your application.

[wizard_hu_]

ReadUserData is user-grantable, thus you should be fine with self-signing. ReadDeviceData would be the one requiring some more powerful certification.

[sathiyapriyanm]

Failed? How? On which device? How does your *.pkg file looks like? Have you installed the *.sis or the *.sisx file? Why?

Hi,

I have tried Installing the sis and sisx file in the device.I have done the self signed certificate too. while installing it on the device,the installation goes normally and at the end it shows me that "Unalbe to Install" error msg..what could be the problem???Kindly help me!!!!!!!!

[kiran10182]

Hi,

I have tried Installing the sis and sisx file in the device.I have done the self signed certificate too. while installing it on the device,the installation goes normally and at the end it shows me that "Unalbe to Install" error msg..what could be the problem???Kindly help me!!!!!!!!

Show the contents of your .pkg file.