S60_3rd_FP1 installed, but failed running helloworldbasic demo.

[sharpblade]

I only installed sdk and without a IDE. After installation, verification seems failed according to the section 4.3.1 of 'S60_CPP_SDK_3rd_FP1_InstallationGuide_1.0.pdf'.

Here's the command log:

C:\Dev\Symbian\9.2\S60_3rd_FP1>devices -setdefault @S60_3rd_FP1:com.nokia.S60

C:\Dev\Symbian\9.2\S60_3rd_FP1>cd S60Ex\HelloWorldBasic\group

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>bldmake bldfiles

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>abld build
make -r -f "\Dev\Symbian\9.2\S60_3rd_FP1\EPOC32\BUILD\Dev\Symbian\9.2\S60_3rd
_FP1\S60Ex\HelloWorldBasic\group\EXPORT.make" EXPORT VERBOSE=-s
Nothing to do

And after open epoc, no helloworld program installed.

PATH:
C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>path
PATH=C:\Program Files\PC Connectivity Solution\;C:\Dev\CSL Arm Toolchain\bin;C:\
Program Files\Common Files\Symbian\Tools;C:\Dev\Perl\site\bin;C:\Dev\Perl\bin;C:
\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;

Any suggestion?

[skumar_rao]

try
abld reallyclean
bldmake clean
bldmake bldfiles
abld build wincw udeb

and paste the output here is it is not working.

Note: Try Carbide.c++ v2.x IDE

[sharpblade]

still not working, here is output:
======================================================
C:\Documents and Settings\Administrator>cd c:\Dev\Symbian\9.2\S60_3rd_FP1

C:\Dev\Symbian\9.2\S60_3rd_FP1>devices -setdefault @S60_3rd_FP1:com.nokia.S60

C:\Dev\Symbian\9.2\S60_3rd_FP1>cd S60Ex\HelloWorldBasic\group

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>abld reallyclean
make -r -f "\Dev\Symbian\9.2\S60_3rd_FP1\EPOC32\BUILD\Dev\Symbian\9.2\S60_3rd
_FP1\S60Ex\HelloWorldBasic\group\EXPORT.make" CLEANEXPORT VERBOSE=-s
Nothing to do

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>bldmake clean

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>bldmake bldfiles

C:\Dev\Symbian\9.2\S60_3rd_FP1\S60Ex\HelloWorldBasic\group>abld build wincw udeb

This project does not support platform, build or program "WINCW"
===============================================================================
I'll try the IDE later, thanks!

try
abld reallyclean
bldmake clean
bldmake bldfiles
abld build wincw udeb

and paste the output here is it is not working.

Note: Try Carbide.c++ v2.x IDE

[kamalakshan]

It says

This project does not support platform, build or program "WINCW"

It should have been WINSCW. Check your bld.inf file to see the supported platforms for the project.

[savaj]

The command "abld build wincw udeb" compile project for code worrier IDE. so if you are not using any IDE then use command "abld build wins udeb"

Also change your bld.inf as follows.
PRJ_PLATFORMS
WINS ARMV5 GCCE

Or you can remove this statement from bld.inf .