Help! nokia 6212

[zamby.ing]

Hi, somebody help me please.
I'm trying to install an applet cap in Nokia 6212 ( Kit SDK toptunniste ) say you should run some command with JCOP tools but I can not find it.

So I'm using GPshell but I get the following output:
mode_211
enable_trace
establish_context
card_connect-readerNumber 0 //... or 1, 2 ...
Error 0x80100069 The smart card is removed ..

Theoretically i can use any tool to manage the smart card. True? For example, JSmartCard, detects the reader but i always say "card not present".

What is wrong? Something wrong with the reader?

The list of cards Nokia6121 is empty. How do i create a new card? That's the problem?

[zamby.ing]

ok... ok....
I resolved, at least one part.
The problem was the driver PCSC.

Now, with JSmrtCard:
Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Connected to: FEIG ID CPR.M02.VP/AB-C 0
Smart Card Found
Protocol: T=1
ATR: 3B8880010073C8401300900071
: ;.ˆ.€.
...s.È.@.......q.
Command APDU:
- CLA=00, INS=CA, P1=00, P2=80, LC=00, LE=00 // MicroChip Info
Response APDU:
- SW1=6A, SW2=88 // Not find object.

How do I create a card?
I need to create a card before you install an applet. Right?

[zamby.ing]

With GPshell:
mode_211
enable_trace
establish_context
card_connect -readerNumber 0
* reader nme FEIG ID CPR.M02.VP/AB-C 0
open_sc -security 3 -keyver 42 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
Command --> 80CA006600
Wrapped commnd --> 80CA006600
Response <-- 66C7.....................
Command --> 80502A00081BD51ACF2DB09D0900
Wrapped command --> 80502A00081BD51ACF2DB09D0900
Responde <- 6A88
mutual_authentication() return 0x80206A88 (6A88: Referenced Data not found.)


..ufff....

[Alex_Polt]

Could it be, that phone is unlocked or you have tried 10 times and now it locked permanently?

[zamby.ing]

I tried once with gpshell ( 1 or 2 test). I think it is definitely not blocked (honestly, other people have used)
I still have not unlocked the phone with the MIDlet from Nokia. Could this be?

Could be the driver of the PCSC reader Feige. For example,
Position it on the phone reader and
if I try repeatedly to connect / disconnect:

Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Unable to connect error n. 0x80100069:
La smart card è stata rimossa. Impossibile effettuare ulteriori comunicazioni.

PC/SC errorerror n. 0x6:
Handle non valido.

Reset Smart Card
Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Connected to: FEIG ID CPR.M02.VP/AB-C 0
Smart Card Found
Protocol: T=1
ATR: 3B8880010073C8401300900071
: ;.ˆ.€....s.È.@.......q.
Reset Smart Card
Disconnect from the previous selected reader
Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Unable to connect error n. 0x80100069:
La smart card è stata rimossa. Impossibile effettuare ulteriori comunicazioni.

PC/SC errorerror n. 0x6:
Handle non valido.

Reset Smart Card
Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Unable to connect error n. 0x80100009:
Impossibile riconoscere il nome del lettore specificato.

PC/SC errorerror n. 0x6:
Handle non valido.

Reset Smart Card
Try to connect to: FEIG ID CPR.M02.VP/AB-C 0
Connected to: FEIG ID CPR.M02.VP/AB-C 0
Smart Card Found
Protocol: T=1
ATR: 3B8880010073C8401300900071
: ;.ˆ.€....s.È.@.......q.

......

Where can I find a very simple midlet to give a test on
the smart card inside without using the reader PCSC?

[Alex_Polt]

You should unlock phone with Nokia Unlock MIDlet first.

[zamby.ing]

I unlocked Nokia 6212 with the MIDlet.
Now, I try to install the cap of gpshell HelloWorld

mode_211
enable_trace
establish_context
card_connect
* reader name FEIG ID CPR.M02.VP/AB-C 0
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 3 -keyver 42 -mac_key 404142434445464748494A4B4C4D4E4F -enc_ke
y 404142434445464748494A4B4C4D4E4F -kek_key 404142434445464748494A4B4C4D4E4F
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040255650B06092B8510864864020103660C060A2B060104012
A026E01029000
Command --> 80502A0008AEB3C36F7D643B5400
Wrapped command --> 80502A0008AEB3C36F7D643B5400
Response <-- 00007320CCAAA75453292A020017D5E0E4354592B937B750D3411F109000
Command --> 8482030010457488C8D4203EA622C865FF69EABE1D
Wrapped command --> 8482030010457488C8D4203EA622C865FF69EABE1D
Response <-- 9000
install -file HelloWorld.cap -priv 2
file name HelloWorld.cap
Command --> 80E602001B09A00000006203010C0107A00000000300000006EF04C60201A80000
Wrapped command --> 84E60200288D353FC381D2FA3286FA3E507A4D46454FED4648FCE16EB79C
0D9CD3F194E5ED14AE7FE02CC78C4500
Response <-- 6A88
install_for_load() returns 0x80206A88 (6A88: Referenced data not found.)

What does this error?

Thanks

[mmattsso]

Hi zamby,

Did you get any answer to this problem?