HBufC::NewL(1) leaves why?

[maildavebudd]

I have developed a Client/Server application that runs fine on the emulator.

On the device however I get a System Error on startup.

Debugging on the device shows it occurs inside the ConstructL of the CActive based class when it tries

HBufC::NewL(4096) - I've tried a value of 1 (to rule out memory availability) as well and get the same error.

When I trap it the error code is 6292496?

I don't know what to make of this given the emulator runs it fine

Thanks

[vaibhavjain]

Error code of 6292496 seems to make no sense as all symbian leave codes are negative integers. Also HBufC::NewL(1) will leave only in very rare scenarios when your application has consumed all its available memory. With default heap of 1 MB typical application dont often use it entirely. Please recheck your code if your code is building properly or not.

Regarding HBufC::NewL(4096) , its quite possible that you are running out of heap here. HBUfC always need a 4K size of continuous memory chunk so its quite possible to run out of memory here. The simplest solution would be to increase your heap size using EPOCHEAPSIZE statement in your mmp:

EPOCHEAPSIZE 4096 2000000
will allocate minimum heap of 4K and maximum of abt 2 MB.

A much better approach then increasing heap size would be to CBufSeg instances for your task.

Hope that helps,
VJ

[hotcheese]

>>6292496

I don't have my calculator, is that -4 wrapping around into a positive value




"HBUfC always need a 4K size of continuous memory chunk"

So you are saying if I want to allocate a HBufC 1 byte long, I will actually require 4096 bytes? Maybe you are confusing the fact that HBufC's allocated amount gets rounded up to a 4 byte multiple?

[vaibhavjain]

Hi hotcheese,

6292496 isnt a 2's complement of -4 when you consider TUint size of 4 bytes. Thats why the value seems to have no sense to me, as only leave that i have practically seen with HBufC::NewL are KErrNoMemory (-4).

Regarding: "HBUfC always need a 4K size of continuous memory chunk" HBufC will allocate continuous memory chunk of that size. I never meant that HBufC::NewL(1) will allocate 4K bytes of memory.

4 byte memory alignment is a constraint of ARM architecture. Its not the constraint of the symbian library. However Armv6 allows unaligned access to memory and who know when symbian base libraries may start exploiting that.

Hope that helps,
VJ

[maildavebudd]

Thanks for help so far, although the suggested mmp file entry for increasing the heap didnt work. Maybe it is build not working then, here's the build log, it only has warnings so I've assumed it has built all ok, but maybe I'm wrong

I have to chop off the first 1000 chars because the post limits to 10000 chars

***Invoking abld command
perl.exe -S ABLD.PL \myAsync\group\ resource gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\GCCE.make" RESOURCE CFG=UREL VERBOSE=-s
Created \Symbian\9.1\S60_3rd_MR\EPOC32\INCLUDE\myAsync.RSG
make -s -C \myAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\.. EPOCBLD=..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\myAsync\group PLATFORM=GCCE CFG=UREL RESOURCE
Checking: ..\gfx\qgn_menu_myasync.svg
Choosing...
Loading mif icons...
Loading file: ..\gfx\qgn_menu_myasync.svg
Writing mif: \Symbian\9.1\S60_3rd_MR\epoc32\data\z\resource\apps\myasync.mif
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNCSERVER\GCCE\MYASYNCSERVER.GCCE" RESOURCEUREL
Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNCSERVER\GCCE\UREL
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNC\GCCE\MYASYNC.GCCE" RESOURCEUREL


Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNC\GCCE\UREL

Total Time: 9 sec

***Invoking abld command
perl.exe -S ABLD.PL \myAsync\group\ target gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\GCCE.make" TARGET CFG=UREL VERBOSE=-s
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
..\\SERVER\\crafty\\Analyze.c: In function `Analyze_ITER':
..\\SERVER\\crafty\\Analyze.c:271: warning: implicit declaration of function `ITER_Iterate_INIT'
..\\SERVER\\crafty\\Analyze.c:276: warning: implicit declaration of function `ITER_Iterate_LOOP_1'
..\\SERVER\\crafty\\Analyze.c:284: warning: implicit declaration of function `ITER_Iterate_LOOP_2'
..\\SERVER\\crafty\\Analyze.c:287: warning: implicit declaration of function `ITER_Iterate_LOOP_5'
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
..\\SERVER\\crafty\\Boolean.c: In function `FirstOne':
..\\SERVER\\crafty\\Boolean.c:82: warning: suggest parentheses around assignment used as truth value
..\\SERVER\\crafty\\Boolean.c:84: warning: suggest parentheses around assignment used as truth value
..\\SERVER\\crafty\\Boolean.c: In function `LastOne':
..\\SERVER\\crafty\\Boolean.c:92: warning: suggest parentheses around assignment used as truth value
..\\SERVER\\crafty\\Boolean.c:94: warning: suggest parentheses around assignment used as truth value
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
..\\SERVER\\crafty\\Iterate.c: In function `ITER_Iterate_LOOP':
..\\SERVER\\crafty\\Iterate.c:1258: warning: control reaches end of non-void function
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
..\\SERVER\\crafty\\Option.c:2238:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2305:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2343:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2384:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2409:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2831:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2902:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:2918:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:3084:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:3105:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:3843:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:3855:1: warning: "/*" within comment
..\\SERVER\\crafty\\Option.c:3937:1: warning: "/*" within comment
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
cc1.exe: warning: command line option "-Wno-ctor-dtor-privacy" is valid for C++/ObjC++ but not for C
..\\SERVER\\crafty\\Utility.c: In function `MyInterupt':
..\\SERVER\\crafty\\Utility.c:3045: warning: implicit declaration of function `ITER_Iterate_LOOP_4'
..\\SERVER\\crafty\\Utility.c:3046: warning: implicit declaration of function `ITER_Iterate_LOOP_5'
In file included from ..\\CLIENT\\src\\Myasyncappui.cpp:18:
..//..//Symbian//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h: In member function `TBool CEikMenuPaneItem::IsScaleableText(const TDesC&) const':
..//..//Symbian//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h:183: warning: enumeral mismatch in conditional expression: `TFalse' vs `TTrue'
make -j 4 -s -C \myAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\.. EPOCBLD=..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\myAsync\group PLATFORM=GCCE CFG=UREL BLD
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNCSERVER\GCCE\MYASYNCSERVER.GCCE" UREL
Mysession.cpp
Myserver.cpp
Analyze.c
Attacks.c
Book.c
Boolean.c
Data.c
Evaluate.c
Hash.c
Init.c
Input.c
Interupt.c
Iterate.c
Killer.c
Main.c
Make.c
Movgen.c
Next.c
Option.c
Output.c
Preeval.c
Quiesce.c
Repeat.c
Resign.c
Root.c
Search.c
Setboard.c
Swap.c
Unmake.c
Utility.c
Drawn.c
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\MYASYNC\GCCE\MYASYNC.GCCE" UREL
Myasyncrequesthandler.cpp
Myasyncserversession.cpp
Myasync.cpp
Myasyncapplication.cpp
Myasyncappview.cpp
Myasyncappui.cpp
Myasyncdocument.cpp

Total Time: 1 min, 49 sec

***Invoking abld command
perl.exe -S ABLD.PL \myAsync\group\ final gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\GCCE.make" FINAL CFG=UREL VERBOSE=-s
make -j 4 -s -C \myAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\.. EPOCBLD=..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\myAsync\group PLATFORM=GCCE CFG=UREL FINAL

Total Time: 1 min, 51 sec

***Invoking abld command
perl.exe -S ABLD.PL \myAsync\group\ test export
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\myAsync\group\EXPORTtest.make" EXPORT VERBOSE=-s
Nothing to do

Total Time: 1 min, 51 sec

***Build Complete

Total Time: 1 min, 51 sec

[maildavebudd]

I have just noticed and this may be the problem that when ODD the CActive object shows as Invalid Format, does this mean that my derived class was not instantiated properly and hence why its ConstructL method has trouble calling HBufC::NewL?

Thanks

[maildavebudd]

Update:

I have ruled out the "Invalid Format" value for the CActive object and that it mght be the build by doing the following.

I took the ClientServerAsync example application from the SDK and added a member to the casyncrequesthandler.h as follows (line in bold)

        */
        TTime iTime;

        /**
        * iObserver, observer which handles updates from the server.
        */
        MAsyncTimeObserver& iObserver;
        
        // Test 
        HBufC *iMyBuffer;

I added a line in the ConstructL method of casyncrequesthandler.cpp as follows (also in bold)

// -----------------------------------------------------------------------------
// CCSAsyncRequestHandler::ConstructL()
// Symbian 2nd phase constructor can leave.
// -----------------------------------------------------------------------------
//
void CCSAsyncRequestHandler::ConstructL()
    {
    TRAPD(errorcode,iMyBuffer = HBufC::NewL(4096));
    User::LeaveIfError( iSession.Connect() );
    }

This also produces the error described earlier in the thread namely the HBufC::NewL leaves with a code of 6304896

Here is the build log for the example as above


***Building project "ClientServerAsync" for configuration "Phone Debug (GCCE) [S60_3rd_MR]"

***Printing environment variables modified from default:
PATH=C:\Symbian\9.1\S60_3rd_MR\epoc32\tools;C:\Symbian\9.1\S60_3rd_MR\epoc32\gcc\bin;C:/Program Files/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Program Files/Nokia/Carbide.c++ v2.0/jre/bin;C:\Program Files\Common Files\Symbian\Tools;C:\Program Files\Nokia\Carbide.c++ v2.0\x86Build\Symbian_Tools\Command_Line_Tools;C:\Program Files\CSL Arm Toolchain\bin;C:\Perl\bin\;C:\Program Files\PC Connectivity Solution\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\QuickTime\QTSystem\
EPOCROOT=\Symbian\9.1\S60_3rd_MR\
NO_DEPENDENCIES=-nd
MAKE=make -j 4

Working Directory: C:/Symbian/Carbide/workspaceMR/ClientServerAsync/group

***Makefile structures up to date. Skipping 'bldmake bldfiles'

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ export
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\EXPORT.make" EXPORT VERBOSE=-s
Nothing to do

Total Time: 0 sec

***Generating abld makefile.

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ makefile gcce icons_aif_scalable
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\GCCE.make" MAKEFILEICONS_AIF_SCALABLE VERBOSE=-s
make -j 4 -s -C \Symbian\Carbide\workspaceMR\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\Symbian\Carbide\workspaceMR\ClientServerAsync\group PLATFORM=GCCE MAKMAKE

Total Time: 0 sec

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ library gcce
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\GCCE.make" LIBRARY VERBOSE=-s
make -s -C \Symbian\Carbide\workspaceMR\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\Symbian\Carbide\workspaceMR\ClientServerAsync\group PLATFORM=GCCE LIB
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" LIBRARY
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" LIBRARY

Total Time: 4 sec

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ resource gcce udeb
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\GCCE.make" RESOURCE CFG=UDEB VERBOSE=-s
Created \Symbian\9.1\S60_3rd_MR\EPOC32\INCLUDE\CSAsync.RSG
make -s -C \Symbian\Carbide\workspaceMR\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\Symbian\Carbide\workspaceMR\ClientServerAsync\group PLATFORM=GCCE CFG=UDEB RESOURCE
Checking: ..\gfx\qgn_menu_csasync.svg
Choosing...
Loading mif icons...
Loading file: ..\gfx\qgn_menu_csasync.svg
Writing mif: \Symbian\9.1\S60_3rd_MR\epoc32\data\z\resource\apps\csasync.mif
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" RESOURCEUDEB
Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNCSERVER\GCCE\UDEB
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" RESOURCEUDEB


Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNC\GCCE\UDEB

Total Time: 9 sec

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ target gcce udeb
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\GCCE.make" TARGET CFG=UDEB VERBOSE=-s
In file included from ..//SERVER//inc/TimeServer.h:22,
from ..\\SERVER\\src\\Timeserver.cpp:21:
..//SERVER//inc/AsyncServer.pan:37:15: warning: no newline at end of file
In file included from ..\\SERVER\\src\\Timeserver.cpp:22:
..//client//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\SERVER\\src\\Timesession.cpp:21:
..//client//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..//SERVER//inc/TimeServer.h:22,
from ..\\SERVER\\src\\Timesession.cpp:22:
..//SERVER//inc/AsyncServer.pan:37:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Timeserversession.cpp:20:
..//CLIENT//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncrequesthandler.cpp:21:
..//CLIENT//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncrequesthandler.cpp:22:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncappui.cpp:18:
..//..//..//..//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h: In member function `TBool CEikMenuPaneItem::IsScaleableText(const TDesC&) const':
..//..//..//..//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h:183: warning: enumeral mismatch in conditional expression: `TFalse' vs `TTrue'
In file included from ..//CLIENT//inc/CSAsyncAppUi.h:22,
from ..\\CLIENT\\src\\Csasyncdocument.cpp:17:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
In file included from ..//CLIENT//inc/CSAsyncAppUi.h:22,
from ..\\CLIENT\\src\\Csasyncappui.cpp:23:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncappui.cpp:26:
..//CLIENT//inc/CSAsync.hrh:31:15: warning: no newline at end of file
make -j 4 -s -C \Symbian\Carbide\workspaceMR\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\Symbian\Carbide\workspaceMR\ClientServerAsync\group PLATFORM=GCCE CFG=UDEB BLD
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" UDEB
Timesession.cpp
Timeserver.cpp
1 file(s) copied.
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" UDEB
Csasyncrequesthandler.cpp
Timeserversession.cpp
Csasync.cpp
Csasyncapplication.cpp
Csasyncappview.cpp
Csasyncappui.cpp
Csasyncdocument.cpp
1 file(s) copied.

Total Time: 45 sec

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ final gcce udeb
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\GCCE.make" FINAL CFG=UDEB VERBOSE=-s
make -j 4 -s -C \Symbian\Carbide\workspaceMR\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\Symbian\Carbide\workspaceMR\ClientServerAsync\group PLATFORM=GCCE CFG=UDEB FINAL

Total Time: 46 sec

***Invoking abld command
perl.exe -S ABLD.PL \Symbian\Carbide\workspaceMR\ClientServerAsync\group\ test export
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\Symbian\Carbide\workspaceMR\ClientServerAsync\group\EXPORTtest.make" EXPORT VERBOSE=-s
Nothing to do

Total Time: 49 sec

***Build Complete

Total Time: 49 sec

[neois]

I tried to edit ClientServerAsync example like you told but everything works fine for me. Compiler also show the same output like you copied.

***Building project "ClientServerAsync" for configuration "Phone Release (GCCE) [S60_3rd_MR]"

***Printing environment variables modified from default:
PATH=C:\Symbian\9.1\S60_3rd_MR\epoc32\tools;C:\Symbian\9.1\S60_3rd_MR\epoc32\gcc\bin;C:/Program Files/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Program Files/Nokia/Carbide.c++ v2.0/jre/bin;C:\Program Files\PC Connectivity Solution\;C:\PROGRA~1\Common Files\Symbian\Tools;C:\PROGRA~1\PC Connectivity Solution\;C:\PROGRA~1\ARM\bin\win_32-pentium;C:\PROGRA~1\CSL Arm Toolchain\bin;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\Java\jre6\bin;C:\PROGRA~1\ARM\RVCT\Programs\2.2\349\win_32-pentium;C:\PROGRA~1\ARM\Utilities\FLEXlm\9.2\release\win_32-pentium;D:\Neois\Installer\Android SDK\android-sdk-windows-1.0_r1\tools;C:\PROGRA~1\Flash Magic;C:\PROGRA~1\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0\bin;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\Acronis\SnapAPI\;C:\Program Files\Nokia\Carbide.c++ v2.0\x86Build\Symbian_Tools\Command_Line_Tools;C:\Program Files\HookLogger\;C:\Program Files\AppServ\Apache2.2\bin;C:\Program Files\AppServ\MySQL\bin;C:\Program Files\AppServ\Apache2.2\bin;C:\Program Files\AppServ\php5;C:\Program Files\AppServ\MySQL\bin;C:\Program Files\Acronis\BackupAndRecovery\;;C:\PROGRA~1\FLASHM~1
EPOCROOT=\Symbian\9.1\S60_3rd_MR\
NO_DEPENDENCIES=-nd
MAKE=make -j 4

Working Directory: C:/SymbianProjects/workspaces/Lab/ClientServerAsync/group

***Makefile structures up to date. Skipping 'bldmake bldfiles'

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ export
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\EXPORT.make" EXPORT VERBOSE=-s
Nothing to do

Total Time: 0 sec

***Generating abld makefile.

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ makefile gcce icons_aif_scalable
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\GCCE.make" MAKEFILEICONS_AIF_SCALABLE VERBOSE=-s
make -j 4 -s -C \SymbianProjects\workspaces\Lab\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\SymbianProjects\workspaces\Lab\ClientServerAsync\group PLATFORM=GCCE MAKMAKE

Total Time: 0 sec

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ library gcce
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\GCCE.make" LIBRARY VERBOSE=-s
make -s -C \SymbianProjects\workspaces\Lab\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\SymbianProjects\workspaces\Lab\ClientServerAsync\group PLATFORM=GCCE LIB
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" LIBRARY
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" LIBRARY

Total Time: 0 sec

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ resource gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\GCCE.make" RESOURCE CFG=UREL VERBOSE=-s
Created \Symbian\9.1\S60_3rd_MR\EPOC32\INCLUDE\CSAsync.RSG
make -s -C \SymbianProjects\workspaces\Lab\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\SymbianProjects\workspaces\Lab\ClientServerAsync\group PLATFORM=GCCE CFG=UREL RESOURCE
Checking: ..\gfx\qgn_menu_csasync.svg
Choosing...
Loading mif icons...
Loading file: ..\gfx\qgn_menu_csasync.svg
Writing mif: \Symbian\9.1\S60_3rd_MR\epoc32\data\z\resource\apps\csasync.mif
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" RESOURCEUREL
Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNCSERVER\GCCE\UREL
make -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" RESOURCEUREL


Creating \Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNC\GCCE\UREL

Total Time: 1 sec

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ target gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\GCCE.make" TARGET CFG=UREL VERBOSE=-s
In file included from ..\\SERVER\\src\\Timesession.cpp:21:
..//client//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..//SERVER//inc/TimeServer.h:22,
from ..\\SERVER\\src\\Timesession.cpp:22:
..//SERVER//inc/AsyncServer.pan:37:15: warning: no newline at end of file
In file included from ..//SERVER//inc/TimeServer.h:22,
from ..\\SERVER\\src\\Timeserver.cpp:21:
..//SERVER//inc/AsyncServer.pan:37:15: warning: no newline at end of file
In file included from ..\\SERVER\\src\\Timeserver.cpp:22:
..//client//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncrequesthandler.cpp:21:
..//CLIENT//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncrequesthandler.cpp:22:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Timeserversession.cpp:20:
..//CLIENT//inc/ClientServerCommon.h:50:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncappui.cpp:18:
..//..//..//..//..//Symbian//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h: In member function `TBool CEikMenuPaneItem::IsScaleableText(const TDesC&) const':
..//..//..//..//..//Symbian//9.1//S60_3rd_MR//EPOC32//include/eikmenup.h:183: warning: enumeral mismatch in conditional expression: `TFalse' vs `TTrue'
In file included from ..//CLIENT//inc/CSAsyncAppUi.h:22,
from ..\\CLIENT\\src\\Csasyncappui.cpp:23:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
In file included from ..\\CLIENT\\src\\Csasyncappui.cpp:26:
..//CLIENT//inc/CSAsync.hrh:31:15: warning: no newline at end of file
In file included from ..//CLIENT//inc/CSAsyncAppUi.h:22,
from ..\\CLIENT\\src\\Csasyncdocument.cpp:17:
..//CLIENT//inc/AsyncTimeObserver.h:38:15: warning: no newline at end of file
make -j 4 -s -C \SymbianProjects\workspaces\Lab\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\SymbianProjects\workspaces\Lab\ClientServerAsync\group PLATFORM=GCCE CFG=UREL BLD
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNCSERVER\GCCE\CSASYNCSERVER.GCCE" UREL
Timesession.cpp
Timeserver.cpp
make -j 4 -s -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\CSASYNC\GCCE\CSASYNC.GCCE" UREL
Csasyncrequesthandler.cpp
Timeserversession.cpp
Csasync.cpp
Csasyncapplication.cpp
Csasyncappview.cpp
Csasyncappui.cpp
Csasyncdocument.cpp

Total Time: 5 sec

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ final gcce urel
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\GCCE.make" FINAL CFG=UREL VERBOSE=-s
make -j 4 -s -C \SymbianProjects\workspaces\Lab\ClientServerAsync\CLIENT\GROUP -f "ICONS_AIF_SCALABLE.MK" TO_ROOT=..\..\..\..\..\.. EPOCBLD=..\..\..\..\..\..\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\ICONS_AIF_SCALABLE\GCCE TO_BLDINF=..\..\..\..\..\..\SymbianProjects\workspaces\Lab\ClientServerAsync\group PLATFORM=GCCE CFG=UREL FINAL

Total Time: 5 sec

***Invoking abld command
perl.exe -S ABLD.PL \SymbianProjects\workspaces\Lab\ClientServerAsync\group\ test export
make -r -f "\Symbian\9.1\S60_3rd_MR\EPOC32\BUILD\SymbianProjects\workspaces\Lab\ClientServerAsync\group\EXPORTtest.make" EXPORT VERBOSE=-s
Nothing to do

Total Time: 5 sec

***Build Complete

***Invoking makesis.exe ....
...

***Invoking makekeys....
...

***Invoking signsis.exe....
...

***SIS Creation Complete

Total Time: 16 sec

Please check the source code and test it on your device (sisx included). http://www.nuuneoi.com/files/ClientServerAsync.zip