Sip configuration for Vyke

[j.p.martins]

Hi
Can someone tell me where to find the Sip configuration for VYKE system?
I had this configured on my N79 but was cleared by mistake.
I had already tried to configure one Sip connection manually but it didn’t allow me to create new Sip connections.

[salimhb]

Found manual settings here: http://forum.aramcoexpats.com/viewtopic.php?f=20&t=1930
Worked on my E71.

Go to settings > connection > SIP Settings and create a new SIP profile with these parameters:
Profile name: Vyke
Service profile: IETF
Default access point: <your choice>
Public user name: sip:<Vyke user id>@sip.vyke.com
Use compression: No
Registration: When needed
Use security: No

Proxy server address: sip:sip.vyke.com
Realm: sip.vyke.com
User name: <Vyke user id>
Password: <Vyke password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server address: sip:sip.vyke.com
Realm: sip.vyke.com
User name: <Vyke user id>
Password: <Vyke password>
Transport type: UDP
Port: 5060

Go back and into Internet tel. create a new profile.

[salauddinrubelbd]

Hi
Can someone tell me where to find the Sip configuration for VYKE system?
I had this configured on my N79 but was cleared by mistake.
I had already tried to configure one Sip connection manually but it didn’t allow me to create new Sip connections.

Asked from them (Vyke/voip service provider)

Regards

[ham33d]

Found manual settings here: http://forum.aramcoexpats.com/viewtopic.php?f=20&t=1930
Worked on my E71.

Go to settings > connection > SIP Settings and create a new SIP profile with these parameters:
Profile name: Vyke
Service profile: IETF
Default access point: <your choice>
Public user name: sip:<Vyke user id>@sip.vyke.com
Use compression: No
Registration: When needed
Use security: No

Proxy server address: sip:sip.vyke.com
Realm: sip.vyke.com
User name: <Vyke user id>
Password: <Vyke password>
Allow loose routing: Yes
Transport type: UDP
Port: 5060

Registrar server address: sip:sip.vyke.com
Realm: sip.vyke.com
User name: <Vyke user id>
Password: <Vyke password>
Transport type: UDP
Port: 5060

Go back and into Internet tel. create a new profile.

Worked like a charm. Thanks a lot.
Note: To work with E52, SIP VoIP 3.x Settings need to be downloaded, more information here.