QWebView is blank on my device but loads on the software debugger

[Larsey]

Yesterday i made a simple app for my Nokia N900 with a QWebView widget. I have a N900 so i tried to debug it on the device, but where the software debugger loaded the url nicely the N900 ended up with a blank(white) screen... any idea what this problem might be?

This is also my first post, so HI ALL

[Nitesh Bhardwaj]

This is also my first post, so HI ALL

welcome to DIBO family...

.. so i tried to debug it on the device, but where the software debugger loaded the url nicely the N900 ended up with a blank(white) screen

have you tried it without debuging?

..N900 ended up with a blank(white) screen

you mean, n900 is restarting?

[Larsey]

Thanks for the welcome

It is not restarting.

Ill explain:

1) Debugging with the software emulator:
i click run/debug and the emulator loads my application 100% just fine. QWebView loads the URL that it set on the constructor and I am very happy

2) Debugging with the device (N900):
I click run/debug and the software is loaded on my n900 just fine. But the QWebView inside the application dont load anything it seems, it just shows a white (blank) screen. I can quit the debugging and my N900 goes bak to the Mad Developer application screen.

[divanov]

Is your N900 connected to any kind of network?

[Larsey]

Multiple i guess... wirelessly to my wireless router (has internet access) and the usb to my computer (that also is connected to the internet)

BUT WAIT: since im using the mad developer and usb thru my computer, i may have to share my internet connection since the usb connection to N900 count as a network connection? i did not think of this possible solution as i thought the N900 would try the wireless as i usually does and always is connected to... am i wrong?

[divanov]

Multiple i guess... wirelessly to my wireless router (has internet access) and the usb to my computer (that also is connected to the internet)

Do you have a proxy enabled?
What is output of route and ifconfig in N900's console?

BUT WAIT: since im using the mad developer and usb thru my computer, i may have to share my internet connection since the usb connection to N900 count as a network connection? i did not think of this possible solution as i thought the N900 would try the wireless as i usually does and always is connected to... am i wrong?

This will work if your PC enables NAT for N900.

[Larsey]

Do you have a proxy enabled?
What is output of route and ifconfig in N900's console?



This will work if your PC enables NAT for N900.

proxy? how do i enable that?

[divanov]

proxy? how do i enable that?

I meant are you behind any kind of firewall, which requires proxy setup?

[Larsey]

i have to test when i get home if internet access over the wirelss is somehow disbled when using mad developer and usb cable. ifso my problem makes sence.

And no, i dont require a proxy at home. it is just a modem connected to a wireless accesspoint. i surf the internet all the time at home, its ONLY when i develop i get the problem. the range of the problem is unknow, becuase it was first yesterday that i made a application that i debugged to my device that needed webaccess.

[divanov]

if internet access over the wirelss is somehow disbled when using mad developer and usb cable

So any chances we can see route and ifconfig output?

[Larsey]

Via the USB i have
192.168.1.15 and i have connection via the usb to my computer (QTCreator can debug to my device)

Via the wireless i have
192.168.1.120 and i have internet connection when im in my couch surfing the web

i have not tried to surf the internet WHILE im using mad developer and is connected to my computer.

[Larsey]

Ive tested... when i use the USB to my computer and mad developer i have no internett connection, EVEN if im connected to my wireless ap. any workaround this? ive tried to share my wireless connection(since im using the usb) on my computer but the n900 still dont get any access to the internet

[divanov]

Ive tested... when i use the USB to my computer and mad developer i have no internett connection, EVEN if im connected to my wireless ap. any workaround this? ive tried to share my wireless connection(since im using the usb) on my computer but the n900 still dont get any access to the internet

Since you didn't provide requested information, I can only guess that you need to change default gateway to wlan0 interface.

[Larsey]

Hmm... how do i do that? Probably whats wrong (because when im using the usb and med developer i have zero internet access while still accessed my wireless at home)

[divanov]

Hmm... how do i do that? Probably whats wrong (because when im using the usb and med developer i have zero internet access while still accessed my wireless at home)

Could you do something for me?
1. Open XTerminal
2. Execute
route > myroutes.txt
3. Copy myroutes.txt to PC.
4. Copy content here.