Posted by Dennis Petersen, firstname.lastname@example.org
on February 15, 2002 at 11:21
You need to download the drivers for the Card Phone from forum.nokia.com. Remove any previous attempt to install it. Install the program you downloaded, and when it asks for it, plug the card in. You should be able to download the driver here: http://forum.nokia.com/main/1,13682,5_3_1_1,00.html
I am using it on an IBM TP T23 with WindowsXP, and it works fine, both on a Citrix dial-up and Internet dial-up.
RE: Card phone 2.0 + Windows XP
Posted by dari al-bahar, email@example.com
on March 06, 2002 at 09:17
I managed to install NCP 2 driver under WinXP successfuly, Connecting through it right now.
Here are the steps u need to go through:
1. Insert ur NCP2 CD and start the installation normally.
2. go through the usual steps, then when a window telling u that the driver isn't digitally signed for XP, click continue anyway.
3. then the setup will ask u to insert the NCP2, and start identifying it. It'll see it as a standard card modem, another pop up window will appear with several selections, pick up "Nokia Card Phone 2" and click next.
4. Continue the setup proccess, it'll finish then prompt u to restart the machine.
5. U're done.
P.S: the trick is 2 chose the other type of modem not the standerd modem in the modem step.