N950 USB + WLAN access

[pixsta]

Hello,

I hope that this question is suitable for this sub-forum: when I connect my N950 (Beta 2 firmware) via USB and SDK mode then WLAN does not work (the phone is connected but it cannot connect to other servers). The same problem occured also with the first beta version. Do I have something to change to make both, USB SDK connection and WLAN internet connection work at the same time?

Regards,

[gnuton]

Hi,
That's should be a routing problem. If you are root you should be able to fix it with a "route add default gw WLAN_GATEWAY_IP" but you don't have root access to the device.
BTW have you tried to connect fist the device to the USB interface and later to the WLAN one?
In this way the MeeGo Internet Connection Daemon should set the right gateway to your device.
Let me know if it works for you.

[pixsta]

Both does not work. For the first hint I run through the following steps
- login via ssh: root / ****me
- route add default gw 192.168.2.1
--> operation not permitted

Also first connecting USB, then WLAN does not work. When I remove the USB cable then WLAN access starts to work without further steps.

I have already reset the device several times, and as I mentioned, the problem was also there with the old firmware.

[gnuton]

Forgot to tell you AEGIS limits root capabilities!
Try using developer account. It sounds crazy but it worked for me! ;P