transforming instruction

[pit_29]

I try to send this sequence that is written in Matlab as follows:
V = uint8 ([0 0 0 0 0 0 0 0 mod (640.256) floor (640 / 256) 0 0 mod (480.256) floor (480/256) 0 0 1 0 0 0 1 0 0 0]);
and my way to send the string is as follows:
char a1=0;
char a2=0;
char a3=0;
char a4=0;
char b1=0;
char b2=0;
char b3=0;
char b4=0;
char c=128;
char d=512;
char b=0;
char a=0;
char e=224;
char f=256;
char g1=0;
char g2=0;
char g3=1;
char g4=0;
char g5=0;
char h1=0;
char h2=1;
char h3=0;
char h4=0;
char h5=0;
QByteArray bytesToSend;
bytesToSend.push_back(a1);
bytesToSend.push_back(a2);
bytesToSend.push_back(a3);
bytesToSend.push_back(a4);
bytesToSend.push_back(b1);
bytesToSend.push_back(b2);
bytesToSend.push_back(b3);
bytesToSend.push_back(b4);
bytesToSend.push_back(y);
bytesToSend.push_back(d);
bytesToSend.push_back(b);
bytesToSend.push_back(a);
bytesToSend.push_back(e);
bytesToSend.push_back(f);
bytesToSend.push_back(g1);
bytesToSend.push_back(g2);
bytesToSend.push_back(g3);
bytesToSend.push_back(g4);
bytesToSend.push_back(g5);
bytesToSend.push_back(h1);
bytesToSend.push_back(h2);
bytesToSend.push_back(h3);
bytesToSend.push_back(h4);
bytesToSend.push_back(h5);
this->socket->connectToHost(host, port);
if(socket->waitForConnected(3000)) {
qDebug("Connected.");
this->socket->write(bytesToSend);

if I do not know how I correctamente.no define each of the values ​​for Quesada sent the instruction as in matlab
thank you very much

[favoritas37]

The problem was in the result of the floor function. Thus, the working code goes like this:

static const char mydata[] = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     0x80, 0x02, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00,
     0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00
 };

 QByteArray data = QByteArray::fromRawData(mydata, sizeof(mydata));
 this->socket->connectToHost( host, port);

 if(socket->waitForConnected(3000)) {
   qDebug("Connected.");
   this->socket->write(data);
 }