Setting up WAP access for Nokia 9210 emulator

[cl_eddie19]

What should I do to set up a WAP access for Nokia 9210 emulator?

[OSXDev]

0. Start t_editdb tool as described in resolution "Connecting Nokia 9210 emulator to Internet"

1. Press 1 to enter "Modem Information". Set up modem as described in resolution "Connecting Nokia 9210 emulator to Internet".

2. Press 2 to enter "ChrageCard Information". Set up charge card information as described in resolution "Connecting Nokia 9210 emulator to Internet".

3. Press 3 to enter "Location Information". Set up location information as described in resolution "Connecting Nokia 9210 emulator to Internet".

4. Press 4 to enter "Dial Out ISP Information". Set up Dial Out ISP Information as described below:
If there are no Dial Out ISP records defined, press CTRL+a to add one.
Enter following values:
Name: My WAP ISP
DefaultTelNum: TYPE YOUR IAP PHONE NUMBER HERE
DialResolution: False
UseLoginScript: False
PromptForLogin: False
LoginName:
LoginPass:
DisplayPCT: False
IfPromptForAuth: False
IfAuthName: TYPE YOUR IAP USERNAME HERE
IfAuthPass: TYPE YOUR IAP PASSWORD HERE
IfCallbackEnabled: False
IfCallbackType: < IETF Type 0 >
IfCallbackInfo:
IpAddrFromServer: True
IpAddr:
IpDNSAddrFromServer: True
IpNameServer1:
IpNameServer2:
EnableIPHeaderComp: True
EnableLCPExtension: True
DisablePlainTextAuth: False
EnableSWComp: True
Type: < Internet And WAP >

Please remember to press Enter to save settings.
Press "Q" to exit "Dial Out ISP Information".

5. Press 5 to enter "Dial Out IAP Information". Set up Dial Out IAP Information as

described below:
If there are no Dial Out IAP records defined, press CTRL+a to add one.
Enter following values:
Name: IAP for My WAP Connection
ISP: < My WAP IAP >
Modem: <Cellular phone cabled >
Location: < Mobile >
Chargacard: < Null >

Please remember to press Enter to save settings.
Press "Q" to exit "Dial Out IAP Information".

6. Press 6 to enter "WAP Access Point Information". Set up Dial Out ISP Information as described below:
If there are no WAP Access Point Information records defined, press CTRL+a to add one.
Enter following values:
Name: My WAP
CurrentBearer: WAPIPBearer
StartPage: TYPE YOU WAP START PAGE HERE

Please remember to press Enter to save settings.
Press "Q" to exit "WAP Access Point Information".

7. Press 7 to enter "WAP IP Bearer Information". Set up IP Bearer Information as described below:
If there are no IP Bearer Information records defined, press CTRL+a to add one.
Enter following values:
AccessPointId: < My WAP >
GatewayAddress: TYPE YOUR WAP GATEWAY ADDRESS (xxx.xxx.xxx.xxx) HERE
IAP: < IAP for My WAP Connection >
ISPType: <Dial Out >
WSPOption: < Connection-Oriented >
Security: False

Please remember to press Enter to save settings.
Press "Q" to exit "Dial Out IAP Information".
Press "Q" to exit t_editdb tool.

Start your Nokia 9210 emulator and start browsing WAP services.

[vinayakak]

dear sir,

I am a postgraduate student from bangalore, india.

I am working on 9210 emulator.
my system configuration is windows xp professional,MSVC++ 6.0, nokia 9200 series communicator sdk.

I have gone through document which says how to configure NT RAS and nokia 9210 emulator which is there in nokia website but i am having windows xp.

can u help me to configure my my 9210 emulator so that i can access internet from my emulator and also to run tcp/ip based applications.


thanks in advance
vinayaka karjigi