sending operator logo with //SCKL?

[aliakkaya]

I am trying to send operator logo to my mobile phone. Two messages are
#1
//SCKL15821582010201 62F81000480E0151D557F55FD5565580A2AABE3EF0FAAA2B80475578078
55D551500A6ABE2A80AAEABAB004D5781545557D59700AAAE3EAAAABAEAAB004D5DE7D555CE7596
#2
//SCKL15821582010202 00A6AF087AAF01EAAE005557D51D7C55D5D600A6ABEAA3C2AFAAAC00515
57D54155F555C00AAAABEAAAAFAAAAC00555557D557F5555800AAAAAAFAAFAAAAB000

I am from turkey (op:turkcell) so mmc =286 mnc=01

I can send concatenated ring tones through my operator but when send these messages nothing happens. no sms is received.

[pautamo]

So mmc in logo in hex is 0x82 0x6F (not 62F8) and mnc is 0x10.
It is best to use binary header (not //SCKL) to assure correct
interpreting in the phone as in Smart Messaging FAQ question 9.
http://www.forum.nokia.com/main/1,35452,1_2_5_5,00.html
BR
M, Forum Nokia

[yildo]

Im having the same problems, I get a delivery report but the message is never sent. I believe the mmc should be 82F6 not 6f but im not sure. I hope the problem is with the coding and not with the operator! I would be grateful If you let me know the solution, also check whether I get a useful reply since my question is same as yours.

regards