NMSS 1.5 cannot forward mms to S40 SDK

[htidore]

Hi,
I have NMSS 1.5, S40 SDK, S40 DP SDK 6230i running at the same time.

In eclipse, I have MMS emulator running and listening at port 9002. The NMSS 1.5 can receive mms ( I send the mms using Nokia MMSC EAIF emulator v1.1 ). In the eclipse, I can see 4 active route 2 mms and 2 sms. The mms active route is described as "Terminal emulator (6270000)" and "Terminal emulator (6230100)".

The problem is when I try to forward the received mms to one of the "Terminal emulator", I got the following message in the NMSS 1.5 console:

[06.12.2005 01:39:58]<INFO>: Received response {204=No Content} from <Client sys
tem id = 5FCF298A04ADB68B7ABE3D 10.226.200.140:9910, id = 1, topics = (<ServerTo
pic systemID=19D2F6B8A92B302B6E9C0AA, serverID=19D2F6B8A92B302B6E9C0AA-SOCKET_SE
RVER_1>) mode = AUTO> socket://10.226.200.140:9910
[06.12.2005 01:39:58]<INFO>: Got: 1(1) routes for MMS with criteria: (receiver,
sender)
[06.12.2005 01:39:58]<INFO>: Sending message to 6270000
Converter content type beforetext/plain;charset=ASCII
Converter content type beforeimage/gif
[06.12.2005 01:39:59]<INFO>: Message, message id = 00000000000000000000000000000
001 sent to URL 6270000
[06.12.2005 01:39:59]<INFO>: No response from sending message

I also notice that when I started the S40 SDK, there is a popup message saying something about being unable for MAC address.

The purpose I am doing all this is to be able to view the message which is received by the NMSS 1.5. Did I miss any step in the simulation ?

Thanks.

[htidore]

I have tried forwarding mms from NMSS 1.5 to S40 DP 2.0 SDK 1.1. The diagnostic in the SDK shows the following:

Pushed: MMS, 89 bytes, application/vnd.wap.mms-message; ISO-8859-1
Raw Content Data: 89 bytes, application/vnd.wap.mms-message; ISO-8859-1
0000 8C 82 98 31 00 8D 90 89 14 80 2B 36 35 31 32 33 ...1......+65123
0010 34 35 2F 54 59 50 45 3D 50 4C 4D 4E 00 96 54 68 45/TYPE=PLMN..Th
0020 69 73 20 69 73 20 61 20 74 65 73 74 20 4D 4D 53 is is a test MMS
0030 20 6D 65 73 73 61 67 65 20 21 00 8A 81 8E 02 39 message !.....9
0040 D5 88 07 81 05 9B A6 E4 54 F7 83 68 74 74 70 3A ........T..http:
0050 2F 2F 6D 6D 73 63 2F 31 00 //mmsc/1.
Headers (none)

Request: http://mmsc/1
Location = [http://mmsc/1]
Request Method = [GET]
Headers (none)

At the same time, NMSS 1.5 console shows the following:

[07.12.2005 09:48:05]<INFO>: Sending message to 6230011
Converter content type beforetext/plain;charset=ASCII
Converter content type beforeimage/gif
[07.12.2005 09:48:06]<INFO>: Message, message id = 00000000000000000000000000000
001 sent to URL 6230011
[07.12.2005 09:48:06]<INFO>: No response from sending message

[kmorgan]

I have the same problem.

The Diagnostics on the 6230i terminal show traffic, but there are no messages physically displayed on the device.

There are no exceptions occurring anywhere.

htidore have you had any progress?

[kmorgan]

I have the following emulator terminals installed:
S40 DP 3.0 SDK
S40 DP 2.0 SDK 6320i
S40 DP 2.0 SDK 6255

All 3 emulators failed to display the MMS. Only the 6320i would show some traffic in the diagnostics window, but like the other two, no MMS would appear on the phone screen.

After my fellow developer workmates tried installing 'NMSS 1.5' and forementioned terminals on 5 different computers, we found that it worked on just 1 computer. We ascertained that it had something to do with JAVA/JRE version.

I uninstalled JRE1.5 and its automatic updates, installed J2SDK 1.4.2_10.

Now the 6230i emulator works, the other two remain the same. But I might try re-installing them.