SDK for S60 1st edition missing

[willehuu]

I am willing to start writing applications for my N-Gage QD. I tried installing "1st ED, FP1, MS&Borland" at http://forum.nokia.com/main/0,6566,034-4,00.html, but it seems that Carbide.c++ cannot find this SDK. It is WINS SDK and I should find a WINSCW one, right? I just don't know where to find the suitable one.

Thanks.

[mitts]

The 1.2 is not supported by Carbide.c++ (it is not listed as supported and hence is not :-). The reason for this is that for the 1.2 there is no WINSCW SDK available.

[willehuu]

I see. According to http://forum.nokia.com/main/0,6566,034-4,00.html:
"Available SDKs:
IDE: Carbide.c++
...
SDK for 1st Edition"

Does this refer to something else or is it just a fraud?

[mitts]

Come on, it's not a fraud, it is a mistake. Product Release notes are the ultimate source for information on supported SDKs, I'll get the web page fixed.

[Bernd42]

The 1.2 is not supported by Carbide.c++ (it is not listed as supported and hence is not :-). The reason for this is that for the 1.2 there is no WINSCW SDK available.

That is strange. There used to be a WINSCW 1.2 version available on this site, but it seems to be gone now. I used it even with CW 3.1 to develop and update some applications. Of course this is just an observation and I don't want to accuse anybody of anything. ;-)

Best Regards,
Bernd

[mitts]

Hi,

I can't remember if there has been a WINSCW version of 1.2, perhaps it was only 0.9?

In any case, at this time there is only a WINS 1st Ed SDK, and even if there were (or you have one on your PC) a WINSCW version, it is not supported, the Release notes and the installer screen and the Installation guide are right and the web page has now been fixed.