Discussion Board

Results 1 to 3 of 3
  1. #1
    Hi All ,

    I am not able to Communicate with the Nokia 6110 phone with AT Commnads.
    When i installed the Nokia Data Suite some improvement was there but i could not send the SMS thru AT+CMGS.Any clues or suggestion from your side will be highly helpfull to me.
    Can anybody clarify me whether it is Necessary to use Nokia Data Suite to support the AT Commands for Nokia Mobile Phone 6110?
    Can anybody tell which model nokia phone doesnot require the Nokia Data Suite.


    Thanks in Advance,
    Naveen

  2. #2
    Nokia Developer Expert auvinent's Avatar
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hello!

    Data Suite or Connectivity SDK is required to communicate with 6110.

    Any data enabled phone works without Data Suite (7110, 6210, 6310, 6310i to name few)

    What happens when you try to issue the AT commands?

    Teemu / Forum Nokia

  3. #3
    Registered User pclauberg's Avatar
    Join Date
    Mar 2003
    Posts
    1
    I don't know exactly about a 6110, but for example with a 6310 you just need, a
    DLR-3P cable and a terminal program like hyperterm

    Comm Parameters are 8N1 and 57600 bit/s should work

    Just try "ATZ" and see if you get the "OK"

    good luck
    Patrick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Nokia Developer aims to help you create apps and publish them so you can connect with users around the world.

京ICP备05048969号  © Copyright Nokia 2013 All rights reserved