[moved] Debugging S60 webkit in carbide

[vivekcd]

I have installed S60 and Build it on my machine.I want to debug it in carbide.If i want to import inf files, which INF file do i need to import?
Also i tried to import some of the INF files contained inside S60 folder to carbide,but am getting the following error.

1.WEBCORE.MMP: no such file or directory
For the above error, where do I specify the path ?

If I try to import some other INF file, I am getting the following errors:

1. MemMan.mmp: Error detected on token CAP_GENERAL_DLL

Please help me to resolve the above errors.

[ltomuta]

The path is specified in the bld.inf file itself (and that is the *.inf file you need to import) . If there is no path element than the *.mmp file is expected to be in the same directory as the bld.inf itself.

Replace "CAP_GENERAL_DLL" with "ALL -TCB".

For information about how you can checkout, compile and contribute to the S60 browser development, see our WiKi for the S60 WebKit.

[vivekcd]

Thanks for your reply.
We have followed the steps suggested by you and we have resolved few of the errors by including the required MMP files in the same folder where bld.inf is present. But, still we got two errors for JavaScriptCore.mmp and pcre.mmp files(No such directory or file). Both the above mentioned files are present in the directory where bld.inf is there.
Also, we were able to fix CAP_GENERAL_DLL error. But, we are getting other errors like error detected on token VID_DEFAULT, EPOCALLOWDLLDATA, CAP_ECOM_PLUGIN.

Can you help us in resolving these errors ?

Regards,
Vivek.

[ltomuta]

VID_DEFAULT - replace it with your VendorID or with 0x00000000
CAP_ECOM_PLUGIN - I have no idea how is defined in S60's source code but "ALL -TCB" will definitely solve it.
EPOCALLOWDLLDATA - nothing to do here if Carbide cannot handle it. Change the IDE or be prepared for some serious work in removing the WSD from those DLLs.

I do not have the project so I cannot tell you what is wrong with the file paths. However you can import the MMP files one by one instead of importing the bld.inf.

[jllts2000]

第一：在要调试的MMP中加入
#include <variant\Symbian_OS_v9.1.hrh>
这个文件中

例如：
#include <variant\Symbian_OS_v9.1.hrh>
#include <data_caging_paths.hrh>

TARGET WebUi.exe
TARGETTYPE exe
UID 0x100039CE 0xA00033A1
epocstacksize 0x5000
EPOCHEAPSIZE 0x5000 0x1000000

VENDORID VID_DEFAULT
//CAPABILITY CAP_APPLICATION DRM ProtServ NetworkControl -Location
CAPABILITY CAP_APPLICATION ProtServ -Location

EpocAllowDllData

SOURCEPATH ..\src

第二：接着把
C:\Symbian\9.1\S60_3rd\s60\S60Internals\S60.hrh文件中的 宏定义考到
Symbian_OS_v9.1.hrh 这个文件的末尾
第三：用Carbide.c++ 1。1 导入MMP或者INF
就可以调试了。

[lilei_66]

VID_DEFAULT - replace it with your VendorID or with 0x00000000
CAP_ECOM_PLUGIN - I have no idea how is defined in S60's source code but "ALL -TCB" will definitely solve it.
EPOCALLOWDLLDATA - nothing to do here if Carbide cannot handle it. Change the IDE or be prepared for some serious work in removing the WSD from those DLLs.

I do not have the project so I cannot tell you what is wrong with the file paths. However you can import the MMP files one by one instead of importing the bld.inf.

hello have you compiled the webkit browser project successfully? please help me to do it if you have been successful

[skumar_rao]

hello have you compiled the webkit browser project successfully? please help me to do it if you have been successful

what is the problem you are getting. I suggest creating a new thread if your not getting same problem as vivekcd

[lilei_66]

what is the problem you are getting. I suggest creating a new thread if your not getting same problem as vivekcd

I use the build.bat but it give me the following error:
Creating \EPOC32\BUILD\S60\WEBUI\WINSCW\UDEB
make -r -f "\EPOC32\BUILD\S60\WINSCW.make" TARGET CFG=UDEB VERBOSE=-s

Errors caused tool to abort.
make[1]: *** [\EPOC32\RELEASE\WINSCW\UDEB\MemMan_sdk.dll] Error 1
make: *** [TARGETMEMMAN] Error 2
make -s -r -f "\EPOC32\BUILD\S60\MEMMAN\WINSCW\MEMMAN.WINSCW" UDEB
what is the problem

[skumar_rao]

it has some error lines missing . i suggest pasting the output of Problems window here (if you are using carbide.c++). else use the command line and paste the output error here.