Error on building under S60 3.0 Phone (GCCE) Release configuration

[gliganc]

Hello!

First of all I want to mention that I am using for developement the followins: Win XP Pro, Carbide.c++ Express, S60 SDK 3rd 9.1.

I started a new project using wizard and I choose "S60 3.x GUI application" template (that is, anyway, the only one available for S60 3.xx !!! ).
After creation, I set the project configuration as "S60 3.0 Phone (GCCE) Release" and I tried to build the project. I received the following error:
*** [D:/Dev/Symbian/prototypes/MyApplication/sis/MyApplication.sis] Error 1

Is anyone who can tells me how could I fix this problem?

Regards,
Cornel Gligan

[iulian_moldovan]

Have you installed CSL Toolchain?

For compiling for GCCE, after installing the SDK please execute: Start Menu\Programs\S60 Developer Tools\3rd Edition SDK\1.1 MR\Tools\CSL Toolchain (GCCE) - Install then follow the instructions in readme (about PATH environment variable)

[gliganc]

I have CSL Toolchain installed, and the bin folder is in path.

I have to mention that I imported the "helloworldbasic" sample from "S60Ex" folder and this sample works for me. I built it with S60 3.0 Phone (GCCE) Release configuration and I didn't received any error.

I received errors only when I tried to build my S60 3.x GUI application.

Regards,
Cornel

[iulian_moldovan]

The default building process for GCCE finishes with the sis file building.
The error you have is probably due to the fact that the sis cannot be built. Maybe you have compiler errors somewhere in your code.

Is there any error in the output window of your IDE before the error line that mentions the sis file?

[gliganc]

I take a look in Console window and here are the log lines for the error:
...
'Building file: sis/Test.pkg'
'Invoking: CreateSis (Installation File Generator)'
createsis create -pass DefaultPassword "sis/Test.pkg" D:/Dev/Symbian/prototypes/Test/Test/sis/Test.sis
Processing sis/Test.pkg...
sis/Test.pkg(21) : error: file I/O fault.
ERROR! Failed at makesis "sis/Test.pkg"
make: *** [D:/Dev/Symbian/prototypes/Test/Test/sis/Test.sis] Error 1
make: Target `all' not remade because of errors.
Build complete for project Test

The other lines are ok. All building steps were finished with "Finished building: ..."

Regards,
Cornel

[iulian_moldovan]

I take a look in Console window and here are the log lines for the error:
...

sis/Test.pkg(21) : error: file I/O fault.


The other lines are ok. All building steps were finished with "Finished building: ..."

Regards,
Cornel

This is the line you're missing. There is probably the path to the executable file of your application. The file is not found because it was not build. This means you have compiler or link error in your application. Check your code.

[gliganc]

I checked all the code but it seems to be ok. More than that, I didn't write any line code. All code lines are generated by the "S60 3.x GUI Application" project template located under "C++ Application for S60 Project" wizard of the "New Project" window in Carbide.c++ express.

Should I send you all build log?

Regards,
Cornel

[iulian_moldovan]

No, wait a few minutes, I will make a short investigation in my Carbide.c++ Express installation. I personally use VS.NET + carbide.vs.201

[iulian_moldovan]

I made a test, created a new 3.xx GUI application, made no changes in the code and build successfully for WINSCW and GCCE.

Do you have an ActivePerl installed?
Do you have a j2re copy installed?

[gliganc]

I have ActivePerl 5.8.8 Build 817 and J2RE SE v1.4.2_04 installed on my computer. Anyway, as I said before, I imported the "helloworldbasic" sample from "S60Ex" folder and this sample was succsessfully built.

Regards,
Cornel