Archived:Full duplex with PCM16 codec produces echo on Nokia N95 with AD-54 headset (Known Issue)
Archived: This article is archived because it is not considered relevant for third-party developers creating commercial solutions today. If you think this article is still relevant, let us know by adding the template {{ReviewForRemovalFromArchive|user=~~~~|write your reason here}}.
Article Metadata
Tested with
Devices(s): Nokia N95, Nokia N95 8GB
Compatibility
Platform(s): S60 3rd Edition, FP1
Article
Created: User:Technical writer 1
(19 Jun 2008)
Last edited: hamishwillee
(21 Jun 2012)
Description
Simultaneous audio playback and recording (full duplex) may result in echo and/or feedback loop when certain wired headsets are attached and audio is being streamed in uncompressed PCM16 format.
How to reproduce
The example application S60 Platform: Full-Duplex Audio Example supports four codecs: AMR, G.711, G.729, and iLBC.
With the following modifications, also support for PCM16 format can be added:
// Specify PCM16 fourCC as follows:
fourCC = TFourCC(' ', 'P', '1', '6');
// Sample rate:
conf.iRate = EMMFSampleRate16000Hz;
// Buffer size:
const TUint KBufferLength = 0x2000;
Running full-duplex audio with this configuration works fine on most devices, but produces echo on the Nokia N95 when used with the AD-54 headset.
Solution
No solution exists.
(no comments yet)