Archived:Send SMS using Qt Mobility
Article Metadata
Tested with
Devices(s): Nokia N97 Mini, Nokia N900
Compatibility
Platform(s): S60 5th Edition, Maemo 5
Platform Security
Signing Required: DevCert required
Capabilities: ReadUserData, WriteUserData, ReadDeviceData, WriteDeviceData
Article
Keywords: QMessageServiceAction, QMessageId
Created: skumar_rao
(07 Jul 2010)
Last edited: hamishwillee
(13 Jun 2012)
Warning: This example is outdated and may not compile with new sdks; see this for new examples Qt Mobility API Basic Examples Part 1
Tip: Read this article before moving forward: Setting up environment for Qt Mobility API
Contents |
Overview
The following code shows how to send an SMS using Qt Mobility.
Keywords
Project configuration file (.Pro file)
- Add the Qt Mobility project configuration option in the .Pro file as shown below
CONFIG += mobility
MOBILITY += messaging
The use of Messaging requires the ReadUserData and WriteUserData capabilities from the user granted category. It also requires the ReadDeviceData and WriteDeviceData capabilities from the open signed online category. Read more about Capabilities.
symbian {
TARGET.CAPABILITY = ReadUserData \
WriteUserData \
ReadDeviceData \
WriteDeviceData
}
Headers
#include <qtmessaging.h>
private slots:
void messageStateChanged(QMessageServiceAction::State s);
private:
QMessageServiceAction m_MessageServiceAction;
QMessageId m_sendId;
Source file
// connect messages state-change signal to our slot, to get notification
connect(&m_MessageServiceAction, SIGNAL(stateChanged(QMessageServiceAction::State)), this, SLOT(messageStateChanged(QMessageServiceAction::State)));
void send_sms::QtSendSMSMessage(QString address, QString body) {
// Prepare QMessage with address & body
QMessage message;
message.setType(QMessage::Sms);
message.setTo(QMessageAddress(address, QMessageAddress::Phone));
message.setBody(body);
if (iMessageServiceAction.send(message)) {
sendId = message.id();
}
else {
// message sending failed
}
}
void send_sms::messageStateChanged(QMessageServiceAction::State s) {
if (s == QMessageServiceAction::Successful) {
// message send successful
}
else {
// message sending failed
}
}
