|
Defines |
| #define | KApMaxConnNameLength 30 |
| #define | KApMaxGprsApNameLength 100 |
| #define | KApMaxLoginNameLength 32 |
| #define | KApMaxStartPageLength 1000 |
| #define | KApMaxAccessNumLength 21 |
| #define | KApCBInfoLength 21 |
| #define | KApMaxServiceCentreAddrLength 21 |
| #define | KApMaxIpAddressLength 100 |
| #define | KApMaxLoginScriptLength 1000 |
| #define | KApMaxLoginPasswordLength 20 |
| #define | KRetryWait 100000 |
| | Time to wait before retry database operation.
|
Enumerations |
| enum | TApBearerType {
EApBearerTypeCSD = 0x00000001,
EApBearerTypeGPRS = 0x00000002,
EApBearerTypeHSCSD = 0x00000004,
EApBearerTypeAll = 0x00000008,
EApBearerTypeCDMA = 0x00000010,
EApBearerTypeWLAN = 0x00000020,
EApBearerTypeLAN = 0x00000040,
EApBearerTypeLANModem = 0x00000080,
EApBearerTypeAllBearers = 0xffffffff
} |
| | These enums are used to represent the possible bearer types and the filtering criteria in CApSelect. More...
|
| enum | TApCallSpeed {
KSpeedAutobaud = 0x00000000,
KSpeed9600 = 0x00000001,
KSpeed14400 = 0x00000002,
KSpeed19200 = 0x00000003,
KSpeed28800 = 0x00000004,
KSpeed38400 = 0x00000005,
KSpeed43200 = 0x00000006,
KSpeed56000 = 0x00000007
} |
| | These enums are used to represent the connection speed. More...
|
| enum | TApCallType { ECallTypeAnalogue,
ECallTypeISDNv110,
ECallTypeISDNv120
} |
| | These enums are used to represent the conn. More...
|
| enum | TIPvType { EIPv4 = 1,
EIPv6 = 2
} |
| enum | TWlanNetMode { EAdhoc = 0,
EInfra = 1
} |
| enum | TWlanSecMode {
EOpen = 1,
EWep = 2,
E802_1x = 4,
EWpa = 8,
EWpa2 = 16
} |
Functions |
| | _LIT (KSqlSelectNum,"SELECT %s from %s WHERE %s=%d") |
| | _LIT (KSqlSelectBaseNum,"SELECT * from %s WHERE %s=%d") |
| | _LIT (KDynIpAddress,"0.0.0.0") |
| | 'Dynamic' IP address to use in comparisons
|
| | _LIT (KInvStartPage,"http://") |
| | A start page, which have to be considered as invalid.
|
| | _LIT (KLocation,"Mobile") |
| | A name for the 'location' to use.
|
| | _LIT (KModemBearerCSD,"CSD Modem") |
| | Modem bearer names for (HS)CSD Access Points.
|
| | _LIT (KModemBearerGPRS,"GPRS Modem") |
| | Modem bearer names for GPRS/WCDMA Access Points.
|
| | _LIT (KModemBearerCDMA,"CDMA Modem") |
| | Modem bearer names for CDMA Access Points.
|
| | _LIT (KModemBearerWLAN,"WLANBearer") |
| | Modem bearer names for WLAN Access Points.
|
| | _LIT (KModemBearerLAN,"LANBearer") |
| | Modem bearer names for LAN Access Points.
|
| | _LIT (KModemBearerLANModem,"LANModem") |
| | Modem bearer names for LAN Modem Access Points.
|
| | _LIT (KDynIpv6Address,"0:0:0:0:0:0:0:0") |
| | _LIT (KDaemonManagerName,"NetCfgExtnDhcp") |
| | _LIT (KConfigDaemonName,"!DhcpServ") |
Variables |
| const TInt | KErrInvalidColumn = -300 |
| | Attempting to read or write a column which does not exists.
|
| const TInt | KErrInvalidBearer = -301 |
| | The given bearer is not valid.
|
| const TInt | KErrInvalidDatabaseType = -302 |
| | The type of the database is not valid.
|
| const TInt | KErrInvalidName = -303 |
| | The name of the AP is not valid (length = 0).
|
| const TInt | KErrDescOverflow = -304 |
| const TInt | KErrNullPointerPassed = -305 |
| | The passed pointer was invalid = NULL.
|
| const TInt | KErrInvalidFilterType = -310 |
| | The filter is not valid.
|
| const TInt | KErrInvalidBearerType = -311 |
| | The bearer is not valid.
|
| const TInt | KErrInvalidIspRequest = -312 |
| | The ISP type given is invalid.
|
| const TInt | KErrValueUnspecified = -323 |
| | Used when the requested value was not specified in the database.
|
| const TInt | KApEngineMaxSql = 255 |
| const TInt | KEApSortUidAscending = 0x00000001 |
| | These constants are used to represent the sorting order used in CApSelect. The sorting is done according to the ID of the access points in ascending order.
|
| const TInt | KEApSortUidDescending = 0x00000002 |
| | The sorting is done according to the ID of the access points in descending order.
|
| const TInt | KEApSortNameAscending = 0x00000003 |
| | The sorting is done according to the name of the access points in ascending order.
|
| const TInt | KEApSortNameDescending = 0x00000004 |
| | The sorting is done according to the name of the access points in descending order.
|
| const TInt | KEApIspTypeInternetOnly = 0x00000001 |
| | These enums are used to represent one the filtering criterias in CApSelect. Filter allows only access points that are capable of only internet access.
|
| const TInt | KEApIspTypeWAPOnly = 0x00000002 |
| | Filter allows only access points that are capable of only WAP access.
|
| const TInt | KEApIspTypeInternetAndWAP = 0x00000004 |
| | Filter allows only access points that are capable of internet AND WAP access.
|
| const TInt | KEApIspTypeWAPMandatory = 0x00000008 |
| | Filter allows only access points that are capable of WAP access AND contain mandatory WAP settings.
|
| const TInt | KEApIspTypeAll = 0x00000010 |
| | No filtering is done, all access points are shown.
|
| const TInt | KEApIspTypeMMSMandatory = 0x00000020 |
| | Filter allows only access points that are capable of MMS and contain MMS mandatory settings Starting Page.
|
| const TInt | KModifiableTextLength = 100 |
| const TInt | KModifiableLongTextLength = 1000 |
| const TUint32 | KMaxAnalogueSpeed = KSpeed28800 |
| const TUint32 | KMaxIsdnSpeed = KSpeed43200 |
| const TUint32 | KMaxAnalogueSpeedWcdma = KSpeed28800 |
| const TUint32 | KMaxIsdnSpeedWdma = KSpeed56000 |
| const TInt | KRetryCount = 5 |
| | Number of retries that are used in database operations.
|
| const TUint32 | KCallBackTimeOut = 60000000 |
